Linux version 2.4.7-rmk3-np1-devfs (jamey@rockhopper.crl.dec.com) (gcc version 2.95.2 19991024 (release)) #6 Fri Sep 21 17:06:13 EDT 2001
Processor: Intel StrongARM-1110 revision 6
Architecture: Compaq iPAQ
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: noinitrd root=/dev/mtdblock/2 init=/linuxrc.intimate console=ttySA0
Relocating machine vectors to 0xffff0000
Console: colour dummy device 80x30
Calibrating delay loop... 137.21 BogoMIPS
Memory: 32MB = 32MB total
Memory: 30704KB available (1149K code, 262K data, 60K init)
Dentry-cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode-cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
CPU clock: 206.400 MHz (max 206.400 MHz)
Starting kswapd v1.8
devfs: v0.107 (20010709) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x2
JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB.
dma period = 1398056 ps
dma period = 1398056 ps
Console: switching to colour frame buffer device 40x30
sa1100fb_setup_gpio 'mask' for GPIO is 3fc
pty: 256 Unix98 ptys configured
block: queued sectors max/low 20157kB/6719kB, 64 slots per queue
SA1100 flash: probing 32-bit flash bus
SA1100 flash: Found 2 x16 devices at 0x0 in 32-bit mode
JEDEC ID: 89 17
0: offset=0x0,size=0x40000,blocks=64
parse_bootldr_partitions: magic=0x646c7470
parse_bootldr_partitions: numPartitions=0x3
parse_bootldr_partitions: npartitions=0x3
        partition bootldr o=0 s=40000
        partition params o=40000 s=40000
        partition root o=80000 s=f80000
Using Compaq bootldr partition definition
Creating 3 MTD partitions on "SA1100 flash":
0x00000000-0x00040000 : "bootldr"
mtd: Giving out device 0 to bootldr
0x00040000-0x00080000 : "params"
mtd: Giving out device 1 to params
0x00080000-0x01000000 : "root"
mtd: Giving out device 2 to root
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 2048)
IPv4 over IPv4 tunneling driver
sa1100fb_setup_gpio 'mask' for GPIO is 3fc
GRE over IPv4 tunneling driver
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Fast Floating Point Emulator V0.0 (c) Peter Teichmann.
NetWinder Floating Point Emulator V0.95 (c) 1998-1999 Rebel.com
mtdblock_open
ok
VFS: Mounted root (jffs2 filesystem).
Mounted devfs on /dev
Freeing init memory: 60K
Linux Kernel Card Services 3.1.22
  options:  [pm]
SA-1100 PCMCIA (CS release 3.1.22)
sa1100_bitsy_common_pcmcia_get_irq_info
sa1100_bitsy_common_pcmcia_get_irq_info
sa1100: initialization complete
h3600_init_module:init_module registering char device
initSerialPort: initializing serial port
init_module successful init major= 254 irq=15
h3600_flite_control: pwr=1 brightness=25 ready=0
h3600_init_module registered pm callback=c2877838
init_module successful init major= 0 irq=48
h3600_generic_pcmcia_init_module: registering sleeve drivers
h3600_sleeve_insert: vendorid=0x1125 devid=0xd7c3
pcmcia_probe_sleeve: Compaq PC Card Sleeve
****sa1100_bitsy_pcmcia_change_sleeves changed
run_sbin_hotplug:75 * hotplug_path=/sbin/hotplug
h3600_sleeve_insert: matched driver Compaq PC Card Sleeve
h3600_single_sleeve_pcmcia_configure_socket: socket=0 vcc=50 vpp=50 reset=0
h3600_single_sleeve_pcmcia_configure_socket: socket=0 vcc=50 vpp=50 reset=1
h3600_single_sleeve_pcmcia_configure_socket: socket=0 vcc=50 vpp=50 reset=0
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
h3600_single_sleeve_pcmcia_configure_socket: socket=0 vcc=50 vpp=0 reset=0
h3600_single_sleeve_pcmcia_configure_socket: socket=0 vcc=50 vpp=0 reset=0
Trying to free nonexistent resource <f6000000-f600000f>
hda: IBM-DSCM-11000, ATA DISK drive
ide0 at 0xf6000000-0xf6000007,0xf600000e on irq 42
ide_cs: hda: Vcc = 5.0, Vpp = 0.0
hda: 2104704 sectors (1078 MB) w/60KiB Cache, CHS=2088/16/63
Partition check:
 /dev/ide/host0/bus0/target0/lun0: p1 p2
VFS: Disk change detected on device ide0(3,1)
 /dev/ide/host0/bus0/target0/lun0: p1 p2
VFS: Disk change detected on device ide0(3,1)
 /dev/ide/host0/bus0/target0/lun0: p1 p2
reiserfs: checking transaction log (device 03:01) ...
Using r5 hash to sort names
ReiserFS version 3.6.25
mtdblock_release
ok
Adding Swap: 32252k swap-space (priority -1)
