Package: 6to4tunnel
Version: 0.1
Depends: menu-tiny, iproute
Section: comm
Architecture: arm
Maintainer: Jamey Hicks <jamey.hicks@compaq.com>
MD5Sum: 3134ca96527307f0e05c4553d38612f5
Size: 1711
Filename: ./6to4tunnel_0.1_arm.ipk
Description: Starts and stops IPv6 6to4 tunnels


Package: althea
Version: 0.5.2
Architecture: arm
Maintainer: tom.lawler@compaq.com
MD5Sum: a240bca1ba8e3ff952a39c5144eaf1f7
Size: 119758
Filename: ./althea_0.5.2_arm.ipk
Description: IMAP and POP3 mail client


Package: backpaq-firmware
Version: 2.0
Architecture: arm
Maintainer: Brian Avery <brian.avery@compaq.com>
MD5Sum: 06c97a4cf3ec43fa030f84fef30fe015
Size: 111872
Filename: ./backpaq-firmware_2.0_arm.ipk
Description: BackPAQ FPGA firmware


Package: bigcam
Version: 1.1
Depends: backpaq-firmware, hotplug, libgtk1.2
Architecture: arm
Maintainer: Andrew Christian <andrew.christian@compaq.com>
MD5Sum: 80f30480e4908d27e2d66234041cc76f
Size: 32231
Filename: ./bigcam_1.1_arm.ipk
Description: BackPAQ Camera Application for Bigcam cameras


Package: camtest
Version: 1.1
Depends: backpaq-firmware
Architecture: arm
Maintainer: Andrew Christian <andrew.christian@compaq.com>
MD5Sum: 8e14b90d2f7e16e0ccbaf70f0616a373
Size: 18027
Filename: ./camtest_1.1_arm.ipk
Description: BackPAQ experimental camera application for cameras


Package: eeprom-tools
Version: 1.5
Depends: python,backpaq-modules,pygtk
Section: admin
Architecture: arm
Maintainer: Andrew Christian <andrew.christian@compaq.com>
MD5Sum: fcf92ef350cf4da153d95aeee778ed3f
Size: 57631
Filename: ./eeprom-tools_1.5_arm.ipk
Description: EEPROM burning tools for the iPAQ


Package: familiar-base
Version: demo5
Depends: sysvinit (>= 2.72)
Architecture: arm
Maintainer: Jamey Hicks <jamey.hicks@compaq.com>
MD5Sum: 40981efcbbb6ae3727c9c4ad4a0ba712
Size: 17072
Filename: ./familiar-base_demo5_arm.ipk
Description: essential files for a familiar installation
  This package is a bit of a catch-all for files that need to be
  installed with familiar, (I made this package from everything that
  was still left over after I split off the rest of the files from
  familiar v0.4 bleeding into their own packages) . Much of what it is
  here is simply emty directories that must exist. Also, there are
  some files here which may be created by scripts in Debian that we
  are not yet runnging. There are probably several files here that
  should move to other packages.


Package: freenet6
Version: 0.7a-2
Depends: iproute
Section: networking
Architecture: arm
Maintainer: Jamey Hicks <jamey.hicks@compaq.com>
MD5Sum: 8f2a9c446d23dd0c9473e0699f790a3c
Size: 23971
Filename: ./freenet6_0.7a-2_arm.ipk
Description: IPv6 Tunnel Setup Protocol


Package: gcardinfo
Version: 1.1
Depends: libgtk1.2, pcmcia-cs, libstdc++2.10-glibc2.2
Section: admin
Architecture: arm
Maintainer: Andrew Christian <andrew.christian@compaq.com>
MD5Sum: b2fe7813dae98573f15c51685486cd73
Size: 94870
Filename: ./gcardinfo_1.1_arm.ipk
Description: Gtk interface to basic PCMCIA card services


Package: h3600-utils
Version: 1.0
Depends: libc6
Section: admin
Architecture: arm
Maintainer: Carl Worth <cworth@handhelds.org>, Andrew Christian <andrew.christian@compaq.com>
MD5Sum: 11960f5f7b4b8ebe5d8a558c4abb5de6
Size: 9378
Filename: ./h3600-utils_1.0_arm.ipk
Description: utilities for controlling hardware on Compaq iPAQ computers\n   This package contains programs for controlling the backlight, contrast (sic)\n   as well as the leds on the Compaq iPAQ H3100/H3600/H3700 series of handheld computers


Package: handy-utils
Version: 2.1
Section: extras
Architecture: arm
Maintainer: steven.ayer@compaq.com
MD5Sum: 2e814fd0dffaef041ac4e90c519dd2f1
Size: 47344
Filename: ./handy-utils_2.1_arm.ipk
Description: just two things most count on:  more, find


Package: hotplug
Version: 1.16
Section: base
Architecture: arm
Maintainer: Jamey Hicks <jamey.hicks@compaq.com>
MD5Sum: fa53336adc365fcdcbb8927f16ea2e13
Size: 6091
Filename: ./hotplug_1.16_arm.ipk
Description: Hotplug add/removal scripts for H3600


Package: ical-outlook
Version: 0.0
Depends: python
Section: libs
Architecture: arm
Maintainer: Neil Reynolds (Neil.Reynolds@hp.com)
MD5Sum: ecca204404575987273b3390b0c2be2d
Size: 1067062
Filename: ./ical-outlook_0.0_arm.ipk
Description: python utility for accessing outlook calendar entries


Package: ipkg
Version: 0.9-demo6
Depends: fileutils, shellutils, textutils, sed, grep, gzip, tar, wget
Section: base
Architecture: arm
Maintainer: Carl Worth <cworth@handhelds.org>
MD5Sum: f5b6619c36f64e0fcf60ada627dae36d
Size: 12540
Filename: ./ipkg_0.9-demo6_arm.ipk
Description: Lightweight package management system


Package: iproute
Version: 2.2.4-now-ss991023-1
Depends: libc6 (>= 2.2.1-2)
Section: net
Architecture: arm
Maintainer: Jamey Hicks <jamey@handhelds.org>
MD5Sum: c1b8ab9ad5953443bdf3c9b703f840c1
Size: 39124
Filename: ./iproute_2.2.4-now-ss991023-1_arm.ipk
Description: This package includes the important tools for controlling the network
 subsystem of the Linux kernel.  It unifies the control of links,
 addresses, routes, rules, and tunnels into the ip command.


Package: ipv6web-bits
Version: 1.0
Depends: familiar v0.4
Architecture: arm
Maintainer: steven.ayer@compaq.com
MD5Sum: 9d213321fe4c528cbb42d50924aa48a3
Size: 452242
Filename: ./ipv6web-bits_1.0_arm.ipk
Description: highly stripped ipv6-compliant apache tree, ipv6 w3m


Package: landcam
Version: 1.3
Depends: backpaq-firmware, hotplug, libgtk1.2, libjpeg62, libpng2
Architecture: arm
Maintainer: Andrew Christian <andrew.christian@compaq.com>
MD5Sum: c8154b92f8c7b098b18e18caa4cd4367
Size: 23081
Filename: ./landcam_1.3_arm.ipk
Description: BackPAQ Camera Application for Landscape cameras


Package: libfreetype6
Version: 2.0.1.20010317-2
Depends: libc6 (>= 2.2.1-2)
Suggests: libfreetype6-dev
Section: libs
Architecture: arm
Maintainer: Carl Worth <cworth@handhelds.org>
MD5Sum: 11419a0f521ee5974935290257300bb3
Size: 211470
Filename: ./libfreetype6_2.0.1.20010317-2_arm.ipk
Description: FreeType 2 font engine, shared library files.
 The FreeType project is a team of volunteers who develop free,
 portable and high-quality software solutions for digital typography.
 They specifically target embedded systems and focus on bringing small,
 efficient and ubiquitous products.
 .
 The FreeType 2 library is their new software font engine.  It has been
 designed to provide the following important features:
  * A universal and simple API to manage font files
  * Support for several font formats through loadable modules
  * High-quality anti-aliasing
  * High portability & performance
 .
 Supported font formats include:
  * TrueType files (.ttf) and collections (.ttc)
  * Type 1 font files both in ASCII (.pfa) or binary (.pfb) format
  * Type 1 Multiple Master fonts.  The FreeType 2 API also provides
    routines to manage design instances easily
  * Type 1 CID-keyed fonts
  * OpenType/CFF (.otf) fonts
  * CFF/Type 2 fonts
  * Adobe CEF fonts (.cef), used to embed fonts in SVG documents with
    the Adobe SVG viewer plugin.
  * Windows FNT/FON bitmap fonts
 .
 This package contains the files needed to run programs that use the
 FreeType 2 library.
 .
  Home Page: http://www.freetype.org/
  Authors: David Turner   <david.turner@freetype.org>
           Robert Wilhelm <robert.wilhelm@freetype.org>
           Werner Lemberg <werner.lemberg@freetype.org>


Package: libgdk-pixbuf
Version: 0.9.0
Depends: libglib1.2
Architecture: arm
Maintainer: Andrew Christian <andrew.christian@compaq.com>
MD5Sum: 90099c078035c405359d27de33273422
Size: 503282
Filename: ./libgdk-pixbuf_0.9.0_arm.ipk
Description: The GDK-pixbuf library of image manipulation routines.


Package: libgpmg1
Version: 1.19.3-6
Depends: libc6 (>= 2.2.1-2), libncurses5
Suggests: gpm
Section: libs
Architecture: arm
Maintainer: Zephaniah E. Hull <warp@debian.org>
MD5Sum: f3ce480a07b8a7debe393d2289b83655
Size: 11397
Filename: ./libgpmg1_1.19.3-6_arm.ipk
Description: General Purpose Mouse Library [libc6]
 This package provides a library that handles mouse requests
 and delivers them to applications.


Package: libpcap-dev
Version: 0.6.2-1
Depends: libpcap0 (= 0.6.2-1), libc6-dev
Section: devel
Architecture: arm
Maintainer: Torsten Landschoff <torsten@debian.org>
MD5Sum: c0c53aef502c55852db16f4b65b6f229
Size: 65316
Filename: ./libpcap-dev_0.6.2-1_arm.ipk
Description: Development library for libpcap.
 Includes headers, static libraries, and documentation.


Package: libpcap0
Version: 0.6.2-1
Depends: libc6 (>= 2.2.1-2)
Section: net
Architecture: arm
Maintainer: Torsten Landschoff <torsten@debian.org>
MD5Sum: e8b24bc70b0631fc71b4148ae24e27a5
Size: 51791
Filename: ./libpcap0_0.6.2-1_arm.ipk
Description: System interface for user-level packet capture.
 libpcap (Packet CAPture) provides a portable framework for low-level
 network monitoring.  Applications include network statistics collection,
 security monitoring, network debugging, etc.
 .
 Since almost every system vendor provides a different interface for
 packet capture, and since there are several tools that require this
 functionality, we've created this system-independent API to ease in
 porting and to alleviate the need for several system-dependent packet
 capture modules in each application.
 .
 Further information is available at <URL: http://www.tcpdump.org/>


Package: madplay-bleed
Version: 0.13.0b
Architecture: arm
Maintainer: Greg Berenfield <gberenfield@berenfield.com>
MD5Sum: 2eb26b3711df93ae2c35ea1141b3d9e5
Size: 136277
Filename: ./madplay-bleed_0.13.0b_arm.ipk
Description: mp3 player (latest version) and madtime song length utility


Package: mipv6-bits
Version: 3.7
Depends: iproute
Section: net
Architecture: arm
Maintainer: steven.ayer@compaq.com
MD5Sum: 8d71cb387662943a45d57dffdf16941a
Size: 38651
Filename: ./mipv6-bits_3.7_arm.ipk
Description: Software pieces necessary to configure and operate unit as a mipv6 node.


Package: ohphone
Version: 0.0-4
Depends: rxvt, menu-tiny
Section: comm
Architecture: arm
Maintainer: Jamey Hicks <jamey.hicks@compaq.com>
MD5Sum: 27f37516ac9253673cbefaef1c5014c0
Size: 2810367
Filename: ./ohphone_0.0-4_arm.ipk
Description: H.323 Voice and Video Conferencing


Package: oneko
Version: 1.5
Architecture: arm
Maintainer: Andrew Christian <andrew.christian@compaq.com>
MD5Sum: dbc16a5fed42c5b30f8ded9652474ef9
Size: 27189
Filename: ./oneko_1.5_arm.ipk
Description: Chase the mouse demo for the Mercury BackPAQ


Package: pcmcia-cs
Version: 0.0-fam3-1
Depends: libc6 (>= 2.2.1-2), modutils, psmisc
Suggests: pcmcia-modules, xlibs (>= 4.0.1-11)
Architecture: arm
Maintainer: Jamey Hicks <jamey.hicks@compaq.com>
MD5Sum: f5a953626ccca76bd47a6cd42f03b9c1
Size: 57533
Filename: ./pcmcia-cs_0.0-fam3-1_arm.ipk
Description: PCMCIA Card Services for Linux.
 NOTE: I couldn't find this package in Debian/arm so I just grabbed
 the control file from my Debian/i386 and combined it with the
 pcmcia-cs bits from familiar v0.4 bleeding. A better solution would
 be to rebuild the real .deb from the pcmcia-cs source.
 .
 PCMCIA cards are commonly used in laptops to provide expanded
 capabilities, such as modems, increased memory, etc.  Some desktop PCs
 can accept PCMCIA cards as well, although this is rare.
 .
 Card Services for Linux is a complete PCMCIA support package.  It
 includes a set of client drivers for specific cards, and a card
 manager daemon that can respond to card insertion and removal events,
 loading and unloading drivers on demand.  It supports ``hot swapping''
 of PCMCIA cards, so cards can be inserted and ejected at any time.
 .
 The actual kernel modules required for this package are contained in
 the pcmcia-modules-<kernel version> package, where <kernel version> is
 the version of the kernel for which the modules have been compiled.


Package: ping6
Version: 1.0
Depends: none
Architecture: arm
Maintainer: steven.ayer@compaq.com
MD5Sum: 677f6c11dce2aa24fc3827ce6f8b2ab7
Size: 14123
Filename: ./ping6_1.0_arm.ipk
Description: ipv6 compliant ping


Package: ppp
Version: 2.4.2b1
Depends: libc6 (>= 2.1.2), libpam0g, libpam-modules, netbase, sysvinit (>= 2.75-4)
Suggests: debconf
Section: base
Architecture: arm
Maintainer: Steve Ayer <steven.ayer@compaq.com>
MD5Sum: 3f7cb5bfbc805cad22297579f3d73bf1
Size: 220006
Filename: ./ppp_2.4.2b1_arm.ipk
Description: Point-to-Point Protocol (PPP) daemon.
 The Point-to-Point Protocol (PPP) provides a standard way to transmit
 datagrams over a serial link, as well as a standard way for the machines
 at either end of the link (the "peers") to negotiate various optional
 characteristics of the link.  Using PPP, a serial link can be used to
 transmit Internet Protocol (IP) datagrams, allowing TCP/IP connections
 between the peers.
 .
 This package contains pppd with PAM support built-in, so `ppp-pam'
 package is obsolete.


Package: procps-kill
Version: 1:2.0.7-4
Depends: libc6 (>= 2.2.1-2), libncurses5
Section: base
Architecture: arm
Maintainer: Craig Small <csmall@debian.org>
MD5Sum: 7f9e026dfc2ed0a646b767eadbcda3e1
Size: 6634
Filename: ./procps-kill_2.0.7-4_arm.ipk
Description: The /proc file system utilities.
 The kill command from the full Debian procps package.


Package: profiling-daemon
Version: 1.1
Architecture: arm
Maintainer: Debby Wallach <debby.wallach@compaq.com>
MD5Sum: 9d9c2f9e225840983cc5f2b67b98150a
Size: 22972
Filename: ./profiling-daemon_1.1_arm.ipk
Description: Daemon for the sampling profile for ARM Linux


Package: psmisc
Version: 20.1-1
Depends: libc6 (>= 2.2.1-2), libncurses5 (>= 5.2.20010310-1)
Section: base
Architecture: arm
Maintainer: Craig Small <csmall@debian.org>
MD5Sum: 6af057f7985ead8a0b7ea13d9e273426
Size: 33634
Filename: ./psmisc_20.1-1_arm.ipk
Description: Utilities that use the proc filesystem
 This package contains three little utilities that use the proc FS:
 .
 `fuser' identifies processes using files (similar to Sun's or SGI's fuser).
 `killall' kills processes by name, e.g. killall -HUP named. `pstree' shows
 the currently running processes as a tree


Package: securecam
Version: 1.1
Depends: backpaq-firmware, hotplug, libgtk1.2, libjpeg62, libpng2, soappy
Section: graphics
Architecture: arm
Maintainer: Andrew Christian <andrew.christian@compaq.com>
MD5Sum: bc5e6d4e17311b0407125f9c65d6ac37
Size: 35884
Filename: ./securecam_1.1_arm.ipk
Description: BackPAQ Security camera application for Landscape cameras


Package: setserial
Version: 2.17-20
Depends: libc6 (>= 2.2.1-2)
Section: base
Architecture: arm
Maintainer: Gordon Russell <g.russell@dcs.napier.ac.uk>
MD5Sum: 9179daecefd131c1a8167cab81ac552e
Size: 10881
Filename: ./setserial_2.17-20_arm.ipk
Description: Controls configuration of serial ports.
 Set and/or report the configuration information associated with
 a serial port. This information includes what I/O port and which IRQ
 a particular serial port is using.
 .
 This version has a completely new approach to configuration, so if you
 have a setup other than the standard ttyS0 and 1, you will have to get
 your hands dirty.
 .
 By default, only COM1-4 are configured by the kernel, using IRQ 3 and 4.
 If you have other serial ports (such as an AST Fourport card), or
 if you have mapped the IRQs differently (perhaps COM3 and 4 to other
 IRQs to allow concurrent access with COM1 and 2) then you must have this
 package.


Package: syslog
Version: 1.0
Section: admin
Architecture: arm
Maintainer: Andrew Christian <andrew.christian@compaq.com>
MD5Sum: d0fc9ad849cf9a70bf5c1373574970df
Size: 28058
Filename: ./syslog_1.0_arm.ipk
Description: System logging (syslog) functions


Package: sysset
Version: 0.0-1
Depends: python, libglade0
Section: admin
Architecture: arm
Maintainer: Carl Worth <cworth@handhelds.org>
MD5Sum: 2c5bf12960af750da3938887fa6832c2
Size: 8777
Filename: ./sysset_0.0-1_arm.ipk
Description: python utility for configuring system settings


Package: task-bootstrap
Version: 0.6-1
Depends: ssh, ppp, kernel-modules-2.4.4-rmk3-np1, pcmcia-modules-2.4.4-rmk3-np1, wireless-tools, pump, hotplug
Architecture: arm
Maintainer: Jamey Hicks <jamey.hicks@compaq.com>
MD5Sum: b9c6f9d48803ea9a7c85090a690e5ad6
Size: 1165
Filename: ./task-bootstrap_0.6-1_arm.ipk
Description: Everything you might need to bootstrap a minimal ipkg system.


Package: task-demo-complete
Version: 5
Depends: ion, menu-tiny, xstroke, hotplug, oneko, checkers, dosfstools, h3600-utils, libglade0, libpopt0, libxaw6, libxml1, libxmltok1, loadmeter, netcat, ntpdate, procps, psmisc, ppp, pump, rsync, ssh, sysset, task-mp3-player, task-wireless, task-x, landcam, xaccel, eeprom-tools
Section: extras
Architecture: arm
Maintainer: Jamey Hicks <jamey.hicks@compaq.com>
MD5Sum: a5733df923d48ae064f7386778e2e65c
Size: 816
Filename: ./task-demo-complete_5_arm.ipk
Description: Task package for a complete Mercury project demo system


Package: task-familiar-complete
Version: 0.5-fam2
Depends: task-bootstrap, apmd, checkers, dosfstools, fscrib, h3600-utils, libglade0, libpopt0, libxaw6, libxml1, libxmltok1, loadmeter, ncurses-base, netcat, ntpdate, pcmcia-modules-2.4.6-rmk1-np2-fam4, procps, ppp, pump, pyditor, qiv, rsync, ssh, sysset, xvkbd, task-mp3-player, task-games, task-wireless, task-x
Architecture: arm
Maintainer: Carl Worth <cworth@handhelds.org>
MD5Sum: cfd796766f3fc4e221e871e78777144a
Size: 832
Filename: ./task-familiar-complete_0.5-fam2_arm.ipk
Description: Task package for a complete familiar system


Package: task-mipv6-phase1-demo
Version: 2
Depends: hotplug, oneko, checkers, dosfstools, fscrib, h3600-utils, libglade0, libpopt0, libxaw6, libxml1, libxmltok1, loadmeter, ncurses-base, netcat, ntpdate, pcmcia-modules-2.4.3-rmk2-np1, procps, ppp, pump, pyditor, qiv, rsync, ssh, sysset, xvkbd, task-mp3-player, task-games, task-wireless, task-x, landcam, xaccel, mipv6-bits, ping6, telnet6, wget6, bash
Architecture: arm
Maintainer: Jamey Hicks <jamey.hicks@compaq.com>
MD5Sum: 27a81b43ec42a0a3df8623e248e3e942
Size: 1933
Filename: ./task-mipv6-phase1-demo_2_arm.ipk
Description: Task package for a complete IPv6 Mobility phase1 demo system
 .
 See http://rock.crl.dec.com:8080/mipv6/wiki/Phase1%20Demo for info.


Package: task-mipv6-phase2-development
Version: 1
Depends: hotplug, oneko, checkers, dosfstools, fscrib, h3600-utils, libglade0, libpopt0, libxaw6, libxml1, libxmltok1, loadmeter, ncurses-base, netcat, ntpdate, pcmcia-modules-2.4.6-rmk1-np2-mipv6, procps, ppp, pump, pyditor, qiv, rsync, ssh, sysset, xvkbd, task-mp3-player, task-games, task-wireless, task-x, landcam, xaccel, mipv6-bits, ping6, bash
Architecture: arm
Maintainer: Jamey Hicks <jamey.hicks@compaq.com>
MD5Sum: 4191c9d12d9da23b80352d0c86536849
Size: 1880
Filename: ./task-mipv6-phase2-development_1_arm.ipk
Description: Task package for a complete IPv6 Mobility phase2 development system


Package: tcpdump
Version: 3.6.2-1
Depends: libc6 (>= 2.2.1-2), libpcap0 (<< 0.7.0), libpcap0 (>= 0.6.1-1)
Section: net
Architecture: arm
Maintainer: Torsten Landschoff <torsten@debian.org>
MD5Sum: f650c756d25d983646fb870deb7d57b0
Size: 136488
Filename: ./tcpdump_3.6.2-1_arm.ipk
Description: A powerful tool for network monitoring and data acquisition
 This program allows you to dump the traffic on a network. tcpdump
 is able to examine IPv4, ICMPv4, IPv6, ICMPv6, UDP, TCP, SNMP, AFS
 BGP, RIP, PIM, DVMRP, IGMP, SMB, OSPF, NFS and many other packet
 types.
 .
 It can be used to print out the headers of packets on a network
 interface, filter packets that match a certain expression. You can
 use this tool to track down network problems, to detect "ping attacks"
 or to monitor network activities. More information is at
 <URL: http://www.tcpdump.org/>


Package: telnet6
Version: 1.0
Depends: none
Architecture: arm
Maintainer: steven.ayer@compaq.com
MD5Sum: 22f1d6d9f6804fd95a4140f5f40c26e9
Size: 40862
Filename: ./telnet6_1.0_arm.ipk
Description: ipv6 compliant telnet


Package: vic
Version: 2.8ucl-1.1.3-ipv6-3
Depends: libc6, xlibs, menu-tiny, iproute
Section: comm
Architecture: arm
Maintainer: Carl Worth <cworth@handhelds.org>, Jamey Hicks <jamey@handhelds.org>
MD5Sum: 03d8543cd9dcb738c614e952c4286cff
Size: 1707783
Filename: ./vic_2.8ucl-1.1.3-ipv6-3_arm.ipk
Description: Video conferencing tool with ipv6 support


Package: wget6
Version: 1.0
Depends: none
Architecture: arm
Maintainer: steven.ayer@compaq.com
MD5Sum: 146f6df39cded9870587600edd477d4f
Size: 68070
Filename: ./wget6_1.0_arm.ipk
Description: ipv6 compliant wget


Package: wireless-tools
Version: 21-1.0
Depends: libc6 (>= 2.2.1-2)
Section: net
Architecture: arm
Maintainer: Carl Worth <cworth@handhelds.org>
MD5Sum: 5f7515c8bc9f1ee8d7e25f92cf4e25b9
Size: 17201
Filename: ./wireless-tools_21-1.0_arm.ipk
Description: Tools for manipulating Linux Wireless Extensions
 This package contains the Wireless tools, used to manipulate
 the Linux Wireless Extensions. The Wireless Extension is an interface
 allowing you to set Wireless LAN specific parameters and get the
 specific stats.
 .
 The tools in this package only work with kernel versions 2.2.14
 and above, and 2.3.24 and above.


Package: xaccel
Version: 0.4
Depends: libc6, xlibs, xserver-tiny-h3600
Section: x11
Architecture: arm
Maintainer: Jim Gettys
MD5Sum: ebba3e6ce35e915dedf892aef5c6cfc8
Size: 3988
Filename: ./xaccel_0.4_arm.ipk
Description: Control the screen orientation by using the BackPAQ accelerometer.
 This program is meant to run in the background and control the
 orientation of the screen using the BackPAQ accelerometer. It does
 slight amounts of smoothing to reduce the likelyhood of transients.
 If it can't open the accelerometer it will sleep for 10 seconds
 before it tries again.
 .


