### This file is automatically generated by update-modules
#
# Please do not edit this file directly. If you want to change or add
# anything please take a look at the files in /etc/modutils and read
# the manpage for update-modules.
#
### update-modules: start processing /etc/modutils/0keep
# DO NOT MODIFY THIS FILE!
# This file is not marked as conffile to make sure if you upgrade modutils
# it will be restored in case some modifications have been made.
#
# The keep command is necessary to prevent insmod and friends from ignoring
# the builtin defaults of a path-statement is encountered. Until all other
# packages use the new `add path'-statement this keep-statement is essential
# to keep your system working
keep

### update-modules: end processing /etc/modutils/0keep

### update-modules: start processing /etc/modutils/actions
# Special actions that are needed for some modules

# The BTTV module does not load the tuner module automatically,
# so do that in here
post-install bttv insmod tuner
post-remove bttv rmmod tuner

pre-install usb-eth modprobe sa1100-usb
post-remove usb-eth rmmod sa1100-usb

### update-modules: end processing /etc/modutils/actions

### update-modules: start processing /etc/modutils/aliases
# Aliases to tell insmod/modprobe which modules to use 

# Uncomment the network protocols you don't want loaded:
# alias net-pf-1 off		# Unix
# alias net-pf-2 off		# IPv4
# alias net-pf-3 off		# Amateur Radio AX.25
# alias net-pf-4 off		# IPX
# alias net-pf-5 off		# DDP / appletalk
# alias net-pf-6 off		# Amateur Radio NET/ROM
# alias net-pf-9 off		# X.25
# alias net-pf-10 off		# IPv6
# alias net-pf-11 off		# ROSE / Amateur Radio X.25 PLP
# alias net-pf-19 off		# Acorn Econet

alias char-major-10-175	agpgart
alias char-major-10-200	tun
alias char-major-81	bttv
alias char-major-108	ppp_generic
alias /dev/ppp		ppp_generic
alias tty-ldisc-3	ppp_async
alias tty-ldisc-14	ppp_synctty
alias ppp-compress-21	bsd_comp
alias ppp-compress-24	ppp_deflate
alias ppp-compress-26	ppp_deflate

# Crypto modules (see http://www.kerneli.org/)
alias loop-xfer-gen-0	loop_gen
alias loop-xfer-3	loop_fish2
alias loop-xfer-gen-10	loop_gen
alias cipher-2		des
alias cipher-3		fish2
alias cipher-4		blowfish
alias cipher-6		idea
alias cipher-7		serp6f
alias cipher-8		mars6
alias cipher-11		rc62
alias cipher-15		dfc2
alias cipher-16		rijndael
alias cipher-17		rc5

alias sound-slot-0 sa1100-uda1341 
alias sound-service-0-0 sa1100-uda1341
alias sound-service-0-3 sa1100-uda1341
alias sound-service-0-4 sa1100-uda1341
alias char-major-108 ppp_generic
alias tty-ldisc-3 ppp_async
alias tty-ldisc-14 ppp_synctty
alias tty-ldisc-15 h3600_stowaway
alias irda0 sa1100_ir
alias usbf usb-eth

### update-modules: end processing /etc/modutils/aliases

### update-modules: start processing /etc/modutils/paths
# This file contains a list of paths that modprobe should scan,
# beside the once that are compiled into the modutils tools
# themselves.


### update-modules: end processing /etc/modutils/paths

### update-modules: start processing /etc/modutils/ppp
alias /dev/ppp          ppp_generic
alias char-major-108    ppp_generic
alias tty-ldisc-3       ppp_async  
alias tty-ldisc-14      ppp_synctty
alias ppp-compress-21   bsd_comp   
alias ppp-compress-24   ppp_deflate
alias ppp-compress-26   ppp_deflate

### update-modules: end processing /etc/modutils/ppp

### update-modules: start processing /etc/modutils/setserial
#
# This is what I wanted to do, but logger is in /usr/bin, which isn't loaded
# when the module is first loaded into the kernel at boot time!
#
#post-install serial /etc/init.d/setserial start | logger -p daemon.info -t "setserial-module reload"
#pre-remove serial /etc/init.d/setserial stop | logger -p daemon.info -t "setserial-module uload"
post-install serial /etc/init.d/setserial modload > /dev/null 2> /dev/null
pre-remove serial /etc/init.d/setserial modsave  > /dev/null 2> /dev/null

### update-modules: end processing /etc/modutils/setserial

