Package: ae
Priority: optional
Section: editors
Installed-Size: 144
Debian-Maintainer: Dale Scheetz (Dwarf #1) <dwarf@polaris.net>
Maintainer: Carl Worth <cworth@handhelds.org>
Architecture: arm
Version: 962-30
Depends: libc6 (>= 2.2.1-2), slang1 (>> 1.3.0-0)
Filename: ./ae_962-30_arm.ipk
Size: 15635
MD5Sum: 96f0a0a9e1c3edede3fbdd605fc4a2bb
Description: Anthony's Editor -- a tiny full-screen editor
 ae is a tiny full-screen text editor with both modal (vi-like)
 and modeless (emacs-like) modes, determined by an ae.rc config file.

Package: apmd
Priority: extra
Section: admin
Installed-Size: 284
Debian-Maintainer: Avery Pennarun <apenwarr@debian.org>
Maintainer: Carl Worth <cworth@handhelds.org>
Architecture: arm
Version: 3.0final-1
Depends: libc6 (>= 2.1.2), xlib6g (>= 3.3-5), xlib6g (>= 3.3.6)
Filename: ./apmd_3.0final-1_arm.ipk
Size: 6863
MD5Sum: 3dcb9b6ae51b923058f0a167c7dcb680
Description: Utilities for Advanced Power Management (APM) on laptops
 On laptop computers, the Advanced Power Management (APM) support
 provides access to battery status information and may help you to
 conserve battery power, depending on your laptop and the APM
 implementation.  The apmd program also lets you run arbitrary programs
 when APM events happen (for example, you can eject PCMCIA devices when
 you suspend, or change hard drive timeouts when you connect the battery).
 .
 This package contains apmd(8), a daemon for logging and acting on APM
 events, apm(1), a client that prints /proc/apm, xapm(1x), an X11 utility
 that displays a little graph, on_ac_power(1), a program for shell scripts
 to determine if wall power is connected, and tailf(1) which follows the
 growth of a log file without writing to disk.
 .
 The Debian default kernel does *not* contain APM support, because it causes
 problems on some computers.  So, you need to recompile your kernel
 and enable APM support during configuration; the corresponding questions
 are in the 'Character devices' section.
 .

Package: ash
Essential: yes
Priority: required
Section: shells
Installed-Size: 152
Debian-Maintainer: Herbert Xu <herbert@debian.org>
Maintainer: Carl Worth <cworth@handhelds.org>
Architecture: arm
Version: 0.3.7-16
Pre-Depends: libc6 (>= 2.2.1-2)
Filename: ./ash_0.3.7-16_arm.ipk
Size: 51495
MD5Sum: 1d1f163c5655cee3c62c053b818aadb2
Description: NetBSD /bin/sh
 "ash" is a POSIX compliant shell that is much smaller than "bash".
 We take advantage of that by making it the shell on the installation
 root floppy, where space is at a premium.
 .
 It can be usefully installed as /bin/sh (because it executes scripts
 somewhat faster than "bash"), or as the default shell either of root
 or of a second user with a userid of 0 (because it depends on fewer
 libraries, and is therefore less likely to be affected by an upgrade
 problem or a disk failure).  It is also useful for checking that a
 script uses only POSIX syntax.
 .
 "bash" is a better shell for most users, since it has some nice
 features absent from "ash", and is a required part of the system.

Package: backpaq-firmware-6abc
Priority: required
Version:  1
Architecture: arm
Maintainer: Brian Avery <brian.avery@compaq.com>
Packager: Jamey Hicks <jamey.hicks@compaq.com>
Depends:
Filename: ./backpaq-firmware-6abc_1_arm.ipk
Size: 57782
MD5Sum: 875419c8029cab505704cf8e944d1565
Description: BackPAQ FPGA Firmware

Package: bash
Version: 2.03-6
Section: base
Priority: required
Architecture: arm
Pre-Depends: libc6 (>= 2.1.2), libncurses5
Depends: base-files (>= 2.1.12)
Installed-Size: 748
Debian-Maintainer: Matthias Klose <doko@debian.org>
Maintainer: Carl Worth <cworth@handhelds.org>
Filename: ./bash_2.03-6_arm.ipk
Size: 224887
MD5Sum: 07f98861afc6d22427dd35700b342c68
Description: The GNU Bourne Again SHell
 Bash is an sh-compatible command language interpreter that executes
 commands read from the standard input or from a file.  Bash also
 incorporates useful features from the Korn and C shells (ksh and csh).
 .
 Bash is ultimately intended to be a conformant implementation of the
 IEEE Posix Shell and Tools specification (IEEE Working Group 1003.2).

Package: blackbox
Priority: optional
Version: 0.2
Architecture: arm
Maintainer: Alexander Guy <a7r@handhelds.org>
Depends: libc6, xlibs, libfreetype6, libstdc++2.10-glibc2.2, libxft, libxrender
Filename: ./blackbox_0.2_arm.ipk
Size: 174232
MD5Sum: 2930adac047d8300eafb41d6007668c5
Description: blackbox window manager

Package: checkers
Priority: optional
Version: 0.0
Architecture: arm
Maintainer: Carl Worth <cworth@handhelds.org>
Depends: libc6, xlibs, libfreetype6, libstdc++2.10-glibc2.2, libfltk1
Filename: ./checkers_0.0_arm.ipk
Size: 20117
MD5Sum: 45d08b5ead7c474711e77efcce6bff12
Description: Play checkers against the computer

Package: cpspim
Version: 0.8-1
Architecture: arm
Maintainer: Mark Trinidad <markt@companionlink.com>
Filename: ./cpspim_0.8-1_arm.ipk
Size: 164214
MD5Sum: 0589ef48c1b058add080b48a5515f504
Description: Personal Information Manager
 .
 (with sync script removed for now -Jamey <jamey.hicks@compaq.com>)

Package: cpu-scale-2.4.3-rmk1-np2
Priority: standard
Version: 2.4.3rmk1np2
Architecture: arm
Maintainer: Carl Worth <cworth@handhelds.org>
Depends: modutils
Filename: ./cpu-scale-2.4.3-rmk1-np2_2.4.3rmk1np2_arm.ipk
Size: 4068
MD5Sum: d1b1f8bcfa511ef0a966b8435a61d69b
Description: support for scaling the speed of the SA-1110 processor
  This package contains a kernel module which will allow the speed of
  the SA-1110 processor to be adjusted via /proc/scale

Package: debianutils
Essential: yes
Priority: required
Section: base
Installed-Size: 172
Debian-Maintainer: Guy Maor <maor@debian.org>
Maintainer: Carl Worth <cworth@handhelds.org>
Architecture: arm
Version: 1.15
Replaces: miscutils, cron (<=3.0pl1-31), debian-utils, tetex-bin (<< 1.0.6-1.1)
Pre-Depends: libc6 (>= 2.1.97)
Conflicts: debian-utils
Filename: ./debianutils_1.15_arm.ipk
Size: 9430
MD5Sum: ce83af3644fd050fcd97988dc7074184
Description: Miscellaneous utilities specific to Debian.
 Debianutils includes installkernel mkboot mktemp readlink run-parts savelog
 sensible-editor sensible-pager tempfile which.

Package: dev-files
Essential: yes
Version: 0.4
Priority: required
Architecture: arm
Maintainer: Carl Worth <cworth@handhelds.org>
Filename: ./dev-files_0.4_arm.ipk
Size: 2880
MD5Sum: d4848a628a22fe664f35da48a56e98f4
Description: devices files for /dev directory
  This package contains a collection of devices files for /dev. I'm
  not sure who came up with the list -- I just grabbed it from
  familiar v0.4 bleeding.  Perhaps we'll want to switch to devfs in
  the kernel and eliminate this package?

Package: diff
Priority: optional
Section: base
Installed-Size: 276
Debian-Maintainer: Santiago Vila <sanvila@debian.org>
Maintainer: Carl Worth <cworth@handhelds.org>
Architecture: arm
Version: 2.7-24
Pre-Depends: libc6 (>= 2.2.1-2)
Filename: ./diff_2.7-24_arm.ipk
Size: 35043
MD5Sum: b016146c47582743d57144d13d5cb14c
Description: File comparison utilities
 `diff' shows differences between two files, or each corresponding file
 in two directories.
 .
 The set of differences produced by `diff' can be used to distribute
 updates to text files (such as program source code) to other people.
 This method is especially useful when the differences are small compared
 to the complete files.  Given `diff' output, the `patch' program can
 update, or "patch", a copy of the file.

Package: dosfstools
Priority: optional
Section: otherosfs
Installed-Size: 126
Debian-Maintainer: Roman Hodek <roman@hodek.net>
Maintainer: Carl Worth <cworth@handhelds.org>
Architecture: arm
Version: 2.8-1
Replaces: mkdosfs
Depends: libc6 (>= 2.2.1-2)
Conflicts: mkdosfs
Filename: ./dosfstools_2.8-1_arm.ipk
Size: 14197
MD5Sum: 8fe452f8337b43071f1fa9558b24ac0b
Description: Utilities to create and check MS-DOS FAT filesystems
 Inside of this package there are two utilities to create and to
 check MS-DOS FAT filesystems on either harddisks or floppies under
 Linux.  This version uses the enhanced boot sector/superblock
 format of DOS 3.3+ as well as provides a default dummy boot sector
 code.

Package: e2fsprogs
Priority: required
Section: base
Installed-Size: 584
Debian-Maintainer: Yann Dirson <dirson@debian.org>
Maintainer: Carl Worth <cworth@handhelds.org>
Architecture: arm
Version: 1.19-4
Replaces: e2fslibsg, ss2g, comerr2g
Provides: libcomerr2, libss2, libext2fs2, libe2p2, libuuid1, e2fslibsg
Pre-Depends: libc6 (>= 2.2.1-2)
Suggests: gpart, parted
Conflicts: e2fslibsg, dump (<< 0.4b4-4), quota (<< 1.55-8.1)
Filename: ./e2fsprogs_1.19-4_arm.ipk
Size: 135371
MD5Sum: b61f3677ee894669d066d244969da387
Description: The EXT2 file system utilities and libraries.
 EXT2 stands for "Extended Filesystem", version 2. It's the main
 filesystem type used for hard disks on Debian and other Linux systems.
 .
 This package contains programs for creating, checking, and maintaining EXT2
 filesystems, and the generic `fsck' wrapper.

Package: familiar-base
Essential: yes
Priority: required
Version: 0.10-2
Architecture: arm
OriginalMaintainer: Alexander Guy <a7r@handhelds.org>
Maintainer: Jamey Hicks <jamey.hicks@compaq.com>
Depends: sysvinit (>= 2.72)
Pre-Depends: libc6 (>= 2.1.97)
Filename: ./familiar-base_0.10-2_arm.ipk
Size: 16996
MD5Sum: 4b71ed322fc2661adb3a72dfce7c7fc2
Description: essential files for a familiar installation
  This package is a bit of a catch-all for files that need to be
  installed with familiar, (I made this package from everything that
  was still left over after I split off the rest of the files from
  familiar v0.4 bleeding into their own packages) . Much of what it is
  here is simply emty directories that must exist. Also, there are
  some files here which may be created by scripts in Debian that we
  are not yet runnging. There are probably several files here that
  should move to other packages.

Package: familiar-postinst
Priority: optional
Version: 0.2
Architecture: arm
Maintainer: Alexander Guy <a7r@handhelds.org>
Depends: wget, ntpdate
Filename: ./familiar-postinst_0.2_arm.ipk
Size: 1030
MD5Sum: 418595a8869fadfd3270471d1e17eded
Description: A collection of shell scripts to do postinstall polishing.
  These scripts download some of Microsoft's core True-Type Fonts,
  as well as sync the handheld's time against a public NTP server.

Package: fileutils
Essential: yes
Priority: required
Section: base
Installed-Size: 1892
Debian-Maintainer: Michael Stone <mstone@debian.org>
Maintainer: Carl Worth <cworth@handhelds.org>
Architecture: arm
Version: 4.0.43-1
Replaces: color-ls, util-linux (<= 2.7.1-1)
Pre-Depends: libc6 (>= 2.2.1-2)
Conflicts: color-ls
Filename: ./fileutils_4.0.43-1_arm.ipk
Size: 244849
MD5Sum: 96584322c797c44b0dc2171973b406c3
Description: GNU file management utilities.
 The utilities: chgrp chmod chown cp dd df dir dircolors du install ln
 ls mkdir mkfifo mknod mv rm rmdir shred touch vdir sync.

Package: fscrib
Priority: optional
Version: 0.0
Architecture: arm
Maintainer: Carl Worth <cworth@handhelds.org>
Depends: libc6, xlibs, libxaw7
Filename: ./fscrib_0.0_arm.ipk
Size: 120261
MD5Sum: 916dd41f2ed4b0fe3b4ea08d3a80633e
Description: Full-screen character recognition

Package: fstroke
Priority: optional
Version: 0.2-fam1
Architecture: arm
Maintainer: Carl Worth <cworth@handhelds.org>
Depends: libc6, xlibs, libxaw7
Filename: ./fstroke_0.2-fam1_arm.ipk
Size: 16248
MD5Sum: f4fba9d28f724936cca622f374ce9347
Description: Full-screen modeless character recognizer

Package: ftp
Version: 0.10-3.1
Section: net
Priority: standard
Architecture: arm
Depends: libc6 (>= 2.1.2), libncurses5, libreadline4 (>= 4.1)
Replaces: netstd
Installed-Size: 156
Debian-Maintainer: Herbert Xu <herbert@debian.org>
Maintainer: Carl Worth <cworth@handhelds.org>
Filename: ./ftp_0.10-3.1_arm.ipk
Size: 33962
MD5Sum: d8c10c5d6d03be0b84964c885927e077
Description: The FTP client.
 ftp is the user interface to the ARPANET standard File Transfer Protocol.
 The program allows a user to transfer files to and from a remote network
 site.
Source: netkit-ftp

Package: gdb
Priority: standard
Section: devel
Debian-Maintainer: Vincent Renardias <vincent@debian.org>
Maintainer: Alexander Guy <a7r@handhelds.org> 
Architecture: arm
Version: 5.0-3-fam1
Depends: libc6 (>= 2.1.2), libncurses5
Filename: ./gdb_5.0-3-fam1_arm.ipk
Size: 670925
MD5Sum: df8cddbd32a55ea34c84e51a0813284c
Description: The GNU Debugger
 GDB is a source-level debugger, capable of breaking programs at
 any specific line, displaying variable values, and determining
 where errors occurred. Currently, it works for C, C++, Fortran
 Modula 2 and Java programs. A must-have for any serious
 programmer.

Package: gdk-imlib1
Priority: optional
Section: libs
Installed-Size: 372
Debian-Maintainer: Ossama Othman <ossama@debian.org>
Maintainer: Carl Worth <cworth@handhelds.org>
Architecture: arm
Source: imlib
Version: 1.9.8.1-2
Replaces: gdk-imlib-nonfree1, libgdk-imlib-nonfree1, libgdk-imlib1
Provides: gdk-imlib, libgdk-imlib1
Depends: imlib-base (>= 1.9.8.1-2), libc6 (>= 2.1.97), libglib1.2 (>= 1.2.0), libjpeg62, libpng2, libtiff3g, libungif3g (>= 3.0-2) | giflib3g (>= 3.0-5.2), zlib1g (>= 1:1.1.3)
Suggests: imlib-progs, imagemagick, netpbm, libjpeg-progs
Conflicts: gdk-imlib-nonfree1, libgdk-imlib-nonfree1, libgdk-imlib1
Filename: ./gdk-imlib1_1.9.8.1-2_arm.ipk
Size: 62912
MD5Sum: 38e2feac77d8a95288de100ed3109454
Description: Gdk-Imlib is an imaging library for use with gtk
 Gdk-Imlib is a low-level gdk interface for gtk programmers.  It allows easier
 access to many graphics formats and can write to them as well.

Package: grep
Essential: yes
Priority: required
Section: base
Installed-Size: 488
Debian-Maintainer: Wichert Akkerman <wakkerma@debian.org>
Maintainer: Carl Worth <cworth@handhelds.org>
Architecture: arm
Version: 2.4.2-1
Provides: rgrep
Pre-Depends: libc6 (>= 2.1.2)
Conflicts: rgrep
Filename: ./grep_2.4.2-1_arm.ipk
Size: 119438
MD5Sum: 67fa4cb756f951fda7b7a5d4da2ab523
Description: GNU grep, egrep and fgrep.
 The GNU family of grep utilities may be the "fastest grep in the west".
 GNU grep is based on a fast lazy-state deterministic matcher (about
 twice as fast as stock Unix egrep) hybridized with a Boyer-Moore-Gosper
 search for a fixed string that eliminates impossible text from being
 considered by the full regexp matcher without necessarily having to
 look at every character. The result is typically many times faster
 than Unix grep or egrep. (Regular expressions containing backreferencing
 will run more slowly, however.)

Package: gzip
Essential: yes
Priority: required
Section: base
Installed-Size: 130
Debian-Maintainer: Bdale Garbee <bdale@gag.com>
Maintainer: Carl Worth <cworth@handhelds.org>
Architecture: arm
Version: 1.2.4-33
Depends: debianutils (>= 1.6)
Pre-Depends: libc6 (>= 2.1)
Filename: ./gzip_1.2.4-33_arm.ipk
Size: 30103
MD5Sum: e98844d058d1909781782abea0182887
Description: The GNU compression utility.
 This is the standard GNU file compression utility, which is also the default
 compression tool for Debian.  It typically operates on files with names
 ending in '.gz'.
 .
 This package can also decompress '.Z' files created with 'compress'.

Package: h3600-utils
Priority: standard
Version: 0.4
Architecture: arm
Maintainer: Carl Worth <cworth@handhelds.org>
Depends: libc6
Filename: ./h3600-utils_0.4_arm.ipk
Size: 2736
MD5Sum: 5071017b84fb30c7ae33e3da97dfad80
Description: utilities for controlling hardware on Compaq iPAQ H3600 series computers
  This package contains programs for controlling the backlight (sic)
  as well as the leds on the Compaq iPAQ H3600 series of handheld
  computers.

Package: hostname
Essential: yes
Priority: required
Section: base
Installed-Size: 37
Debian-Maintainer: Adam Heath <doogie@debian.org>
Maintainer: Carl Worth <cworth@handhelds.org>
Architecture: arm
Version: 2.07
Pre-Depends: libc6 (>= 2.1)
Filename: ./hostname_2.07_arm.ipk
Size: 5277
MD5Sum: 2e3ed84ee965ed6bb7619b443b228d63
Description: A utility to set/show the host name or domain name
 The hostname command can be used to either set or display
 the current host or domain name of the system. This name is
 used by many of the networking programs to identify the machine.
 The domain name is also used by NIS/YP.

Package: hotplug
Priority: required
Version:  1.3
Architecture: arm
Maintainer: Jamey Hicks <jamey.hicks@compaq.com>
Depends: backpaq-firmware
Filename: ./hotplug_1.3_arm.ipk
Size: 4927
MD5Sum: d478bf2003c6d2e12c93ce9f342df5d1
Description: Hotplug add/removal scripts for H3600 and BackPAQ

Package: ifupdown
Priority: important
Section: base
Installed-Size: 168
Debian-Maintainer: Anthony Towns <ajt@debian.org>
Maintainer: Carl Worth <cworth@handhelds.org>
Architecture: arm
Version: 0.6.4-3
Replaces: netbase (<< 4.00)
Depends: net-tools, libc6 (>= 2.1.2)
Suggests: iproute
Filename: ./ifupdown_0.6.4-3_arm.ipk
Size: 11654
MD5Sum: 7d60dcafa9a3526aca1fa566024e6e42
Description: High level tools to configure network interfaces
 This package provides the tools ifup and ifdown which may be used to
 configure (or, respectively, deconfigure) network interfaces, based on
 the file /etc/network/interfaces.

Package: intimateboot
Priority: optional
Section: extras
Installed-Size: 40960
Debian-Maintainer: Nicols Lichtmaier <nick@debian.org>
Maintainer: James Conner <jim@secret.org.uk>
Architecture: arm
Version: 050301
Depends: reiserfs-module (= 2.4.1-rmk1-np1 )
Filename: ./intimateboot_050301_arm.ipk
Size: 2518
MD5Sum: 92532bfa8875aae0746d6901192b3cd2
Description: This package provides the necessary boot scripts to optionally make the intimate distribution boot up. If a valid boot image for intimate is not found, then the system will boot Familiar from flash as normal. The package provides an additional linuxrc script, which may be run as an alternative to the normal one. It also provides devfs support via a small script. Booting via microdrive or NFS is supported, but you must preconfigure NFS paths etc before starting.  IMPORTANT : You will need to change the linuxargs in the bootloader after installing this package. This is done by entering...  'set linuxargs "noinited devfs=mount root=/dev/mtdblock3 init=/linuxrc.intimate console=ttySA0"' and 'params save' at the boot> prompt.


Package: ion-nasty-hacks
Priority: optional
Version: 200102160-fam1
Architecture: arm
Maintainer: Carl Worth <cworth@handhelds.org>
Depends: libc6, xlibs
Filename: ./ion-nasty-hacks_200102160-fam1_arm.ipk
Size: 58518
MD5Sum: 79a39fcb686adf83942ad50ad32845f4
Description: a text-editorish, keyboard/stylus friendly window manager

Package: ipkg
Essential: yes
Priority: required
Version: 0.7-1
Architecture: all
Maintainer: Carl Worth <cworth@handhelds.org>
Depends: shellutils, textutils, sed, grep, gzip, tar, wget
Filename: ./ipkg_0.7-1_all.ipk
Size: 6625
MD5Sum: 9b4996d0ac01a888bfc826811e11c58f
Description: Lightweight package management system

Package:  ipv6web-bits
Priority:  optional
Version:  1.0
Architecture:  arm
Maintainer:  steven.ayer@compaq.com
Depends:  familiar v0.4
Filename: ./ipv6web-bits_1.0_arm.ipk
Size: 452242
MD5Sum: 9d213321fe4c528cbb42d50924aa48a3
Description:  highly stripped ipv6-compliant apache tree, ipv6 w3m
	      executable.   loads into usr/local space.

	


Package: irda-common
Version: 0.9.14-3
Section: misc
Priority: optional
Architecture: arm
Depends: libc6 (>= 2.2.1-2)
Conflicts: irda-utils
Replaces: irda-utils
Installed-Size: 100
Debian-Maintainer: NOKUBI Takatsugu <knok@daionet.gr.jp>
Maintainer: Alexander Guy <a7r@andern.org>
Source: irda-utils
Filename: ./irda-common_0.9.14-3_arm.ipk
Size: 5259
MD5Sum: d41a70d88dbf47b63bf601cbe176b121
Description: IrDA management utilities
 IrDA management utilities for Linux.
 This package contains irmanager and irattach.

Package: irda-modules-2.4.3-rmk2-np1
Priority: extra
Maintainer: Alexander Guy <a7r@andern.org>
Depends: kernel-modules-2.4.3-rmk2-np1
Version: fam3
Architecture: arm
Filename: ./irda-modules-2.4.3-rmk2-np1_fam3_arm.ipk
Size: 194859
MD5Sum: 7af6f1d272eb0cb135162fb9f9bb2c76
Description: IrDA kernel modules
  The entire suite of kernel modules required to use both SIR and FIR
  IrDA.  This includes IrCOMM, and IrLAN support.

Package: irda-modules-2.4.4-rmk3-np1
Priority: extra
Maintainer: Alexander Guy <a7r@andern.org>
Depends: kernel-modules-2.4.4-rmk3-np1
Version: 1
Architecture: arm
Filename: ./irda-modules-2.4.4-rmk3-np1_1_arm.ipk
Size: 184792
MD5Sum: d56071a58aed463d30532a2122c3b690
Description: IrDA kernel modules
  The entire suite of kernel modules required to use both SIR and FIR
  IrDA.  This includes IrCOMM, and IrLAN support.

Package: iv
Essential: yes
Priority: required
Version: 0.0
Architecture: arm
Maintainer: Carl Worth <cworth@handhelds.org>
Provides: vi
Depends: libc6
Filename: ./iv_0.0_arm.ipk
Size: 8364
MD5Sum: 9cf155930e6db23ddece8705df27d99d
Description: Lightweight reimplementation of vi <attribution?>

Package: kernel-modules-2.4.3-rmk2-np1
Essential: yes
Priority: required
Version: fam3
Architecture: arm
Maintainer: Alexander Guy <a7r@andern.org>
Depends: modutils
Filename: ./kernel-modules-2.4.3-rmk2-np1_fam3_arm.ipk
Size: 585458
MD5Sum: 2cd52706ce0157337664414bc6e75943
Description: kernel modules for kernel 2.4.3-rmk2-np1
  This package contains almost all of the kernel modules that might be
  useful within familiar. Eventually I would like to split many of
  these modules off into their own packages that would have dependency
  links from the programs that need them. For example, e2fsprogs could
  depend on e2fs-kernel-modules or something like that. I have already
  split off cpu-scale and the pcmcia modules into their own packages.

Package: kernel-modules-2.4.4-rmk3-np1
Essential: yes
Priority: required
Version: 1
Architecture: arm
Maintainer: Alexander Guy <a7r@andern.org>
Depends: modutils
Filename: ./kernel-modules-2.4.4-rmk3-np1_1_arm.ipk
Size: 702072
MD5Sum: d62fc57fb2885264788031c1c3ddcd4d
Description: kernel modules for kernel 2.4.4-rmk3-np1
  This package contains almost all of the kernel modules that might be
  useful within familiar. Eventually I would like to split many of
  these modules off into their own packages that would have dependency
  links from the programs that need them. For example, e2fsprogs could
  depend on e2fs-kernel-modules or something like that. I have already
  split off cpu-scale and the pcmcia modules into their own packages.

Package: less
Version: 346-7
Section: text
Priority: standard
Architecture: arm
Depends: libc6 (>= 2.1.2), libncurses5, debianutils (>= 1.8)
Installed-Size: 163
Debian-Maintainer: Thomas Schoepf <schoepf@debian.org>
Maintainer: Carl Worth <cworth@handhelds.org>
Filename: ./less_346-7_arm.ipk
Size: 41734
MD5Sum: 617280f25bba9c4b03e631af7cd969b2
Description: A file pager program, similar to more(1)
 Less is a program similar to more (1), but which allows backward
 movement in the file as well as forward movement.  Also, less does not
 have to read the entire input file before starting, so with large input
 files it starts up faster than text editors like vi (1).  Less uses
 termcap (or terminfo on some systems), so it can run on a variety of
 terminals.  There is even limited support for hardcopy terminals.
 .
 Homepage: http://www.flash.net/~marknu/less/

Package: libc6
Priority: required
Section: base
Installed-Size: 13104
Debian-Maintainer: Ben Collins <bcollins@debian.org>
Maintainer: Carl Worth <cworth@handhelds.org>
Architecture: arm
Source: glibc
Version: 2.2.2-1
Replaces: ldso (<= 1.9.11-9), timezone, timezones, gconv-modules, libtricks
Provides: gconv-modules, glibc2.2
Suggests: locales, glibc-doc
Conflicts: libdb2 (= 2:2.7.7-2.1), timezone, timezones, gconv-modules, libtricks, libc6-doc
Filename: ./libc6_2.2.2-1_arm.ipk
Size: 1100492
MD5Sum: 4944634b673b732d4a9fc8ec87a1447c
Description: GNU C Library: Shared libraries and Timezone data
 Contains the standard libraries that are used by nearly all programs on
 the system. This package includes shared versions of the standard C library
 and the standard math library, as well as many others.
 Timezone data is also included.

Package: libdb2
Priority: optional
Section: libs
Installed-Size: 388
Debian-Maintainer: Ben Collins <bcollins@debian.org>
Maintainer: Carl Worth <cworth@handhelds.org>
Source: db
Version: 2:2.7.7-3
Architecture: arm
Replaces: libdb2.6, lib-bdb2
Depends: libc6 (>= 2.2.1-2)
Conflicts: lib-bdb2
Filename: ./libdb2_2.7.7-3_arm.ipk
Size: 138089
MD5Sum: ed771a8cdf8225b98db3c61b39a05d07
Description: The Berkeley database routines (run-time files).
 libdb2 is a library for manipulating database files, developed at
 Berkeley and extended by Sleepycat Software Inc.
 This is the stable version, also commercially supported.
 .
 It supports three kinds of file formats:
  * btree. A representation of a sorted, balanced tree structure.
  * hashed. An extensible, dynamic hashing scheme.
  * UNIX file oriented. A byte stream file with fixed or variable
    length records.
 Other core database services:
  * page cache management for fast access, clean page allocation.
  * lock with multiple reader/writer granularity.
  * nested transaction support with logging and rollback recovery
    (two phase commit).
  * Large set of utility, to dump/load/restore data and examine log.

Package: libfltk1
Priority: optional
Section: libs
Installed-Size: 370
Debian-Maintainer: Fabrizio Polacco <fpolacco@debian.org>
Maintainer: Carl Worth <cworth@handhelds.org>
Architecture: arm
Source: fltk
Version: 1.0.9-1.1
Depends: libc6 (>= 2.2.1-2), libgl1, libstdc++2.10-glibc2.2, xlibs (>= 4.0.1-11)
Filename: ./libfltk1_1.0.9-1.1_arm.ipk
Size: 186802
MD5Sum: 59c552236fc0e89fd4fb7474d6fbfe0a
Description: The Fast Light Toolkit, a GUI toolkit inspired by libForms
 This is a very nice LGPL'd graphic user interface toolkit originally based on
 libForms. Programs written using libForms will hopefully be ported to libfltk
 in the future and will need this package to run.

Package: libfreetype6
Priority: optional
Section: libs
Installed-Size: 396
Debian-Maintainer: Anthony Fok <foka@debian.org>
Maintainer: Carl Worth <cworth@handhelds.org>
Architecture: arm
Source: freetype
Version: 2.0.1.20010317-2
Replaces: freetype0, freetype1
Depends: libc6 (>= 2.2.1-2)
Suggests: libfreetype6-dev
Conflicts: freetype
Filename: ./libfreetype6_2.0.1.20010317-2_arm.ipk
Size: 211470
MD5Sum: 11419a0f521ee5974935290257300bb3
Description: FreeType 2 font engine, shared library files.
 The FreeType project is a team of volunteers who develop free,
 portable and high-quality software solutions for digital typography.
 They specifically target embedded systems and focus on bringing small,
 efficient and ubiquitous products.
 .
 The FreeType 2 library is their new software font engine.  It has been
 designed to provide the following important features:
  * A universal and simple API to manage font files
  * Support for several font formats through loadable modules
  * High-quality anti-aliasing
  * High portability & performance
 .
 Supported font formats include:
  * TrueType files (.ttf) and collections (.ttc)
  * Type 1 font files both in ASCII (.pfa) or binary (.pfb) format
  * Type 1 Multiple Master fonts.  The FreeType 2 API also provides
    routines to manage design instances easily
  * Type 1 CID-keyed fonts
  * OpenType/CFF (.otf) fonts
  * CFF/Type 2 fonts
  * Adobe CEF fonts (.cef), used to embed fonts in SVG documents with
    the Adobe SVG viewer plugin.
  * Windows FNT/FON bitmap fonts
 .
 This package contains the files needed to run programs that use the
 FreeType 2 library.
 .
  Home Page: http://www.freetype.org/
  Authors: David Turner   <david.turner@freetype.org>
           Robert Wilhelm <robert.wilhelm@freetype.org>
           Werner Lemberg <werner.lemberg@freetype.org>


Package: libglade0
Priority: optional
Section: libs
Installed-Size: 164
Debian-Maintainer: Paolo Molaro <lupus@debian.org>
Maintainer: Carl Worth <cworth@handhelds.org>
Architecture: arm
Source: libglade
Version: 0.16-2
Depends: libc6 (>= 2.2.1-2), libglib1.2 (>= 1.2.0), libgtk1.2 (>= 1.2.8-3), libxml1, xlibs (>= 4.0.1-11), zlib1g (>= 1:1.1.3)
Filename: ./libglade0_0.16-2_arm.ipk
Size: 35028
MD5Sum: 26211c69d51e1f8abd45022eaadb25b1
Description: Library to load .glade files at runtime.
 This library allows you to load user interfaces in your program, which are
 stored externally.  This allows alteration of the interface without
 recompilation of the program.
 .
 The interfaces can also be edited with GLADE.

Package: libglib1.2
Priority: optional
Section: libs
Installed-Size: 264
Debian-Maintainer: Ben Gertzfield <che@debian.org>
Maintainer: Carl Worth <cworth@handhelds.org>
Architecture: arm
Source: glib1.2
Version: 1.2.10-1
Replaces: libgtk-doc
Depends: libc6 (>= 2.2.1-2)
Suggests: libgtk1.2
Filename: ./libglib1.2_1.2.10-1_arm.ipk
Size: 68147
MD5Sum: 1fe1ad635bc78331c9e3ae27406ddc12
Description: The GLib library of C routines
 GLib is a library containing many useful C routines for things such
 as trees, hashes, and lists. GLib was previously distributed with
 the GTK+ toolkit, but has been split off as of the developers' version
 1.1.0.
 .
 You do not need to install this package if you have libgtk1 (note 1,
 not 1.1 or 1.2) installed. libgtk1 included libglib in it. libgtk1.1
 and libgtk1.2, however, do need libglib1.1 to be installed separately.

Package: libgtk1.2
Priority: optional
Section: libs
Installed-Size: 2184
Debian-Maintainer: Ben Gertzfield <che@debian.org>
Maintainer: Carl Worth <cworth@handhelds.org>
Architecture: arm
Source: gtk+1.2
Version: 1.2.10-1
Replaces: libgtk1.1.5, libgtk1.1.6, libgtk1.1.9, libgtk1.1.11, libgtk1.1.12, libgtk1.1.13, libgtk1.1.14, libgtk1.1.15, libgtk1.1.16
Depends: libc6 (>= 2.2.1-2), libglib1.2 (>= 1.2.0), xlibs (>= 4.0.1-11)
Pre-Depends: dpkg (>= 1.6.8)
Conflicts: libgtk-dev (<< 1:1.0.2)
Filename: ./libgtk1.2_1.2.10-1_arm.ipk
Size: 602094
MD5Sum: b0ff676813a80f1017876b125bb9bad0
Description: The GIMP Toolkit set of widgets for X
 The GIMP Toolkit is a freely available set of widgets for X.
 GTK is easy to use, and has been implemented in such projects as
 The GNU Image Manipulation Program (The GIMP), GNOME, a GNU
 desktop set of utilities for X, and gzilla, a GNU web-browser.

Package: libjpeg62
Priority: optional
Section: libs
Installed-Size: 204
Debian-Maintainer: Mark Mickan <mmickan@debian.org>
Maintainer: Carl Worth <cworth@handhelds.org>
Architecture: arm
Source: libjpeg6b
Version: 6b-1.3
Replaces: libjpeg6b
Provides: libjpeg6b
Depends: libc6 (>= 2.2.1-2)
Conflicts: libjpeg6b
Filename: ./libjpeg62_6b-1.3_arm.ipk
Size: 64434
MD5Sum: 2cabfc091e7755c93a3d78b2dff48f0f
Description: The Independent JPEG Group's JPEG runtime library [libc6]
 This package contains the shared library.

Package: libncurses5
Version: 5.0-6.0potato1
Section: base
Priority: required
Architecture: arm
Depends: libc6 (>= 2.1.2), ncurses-base
Installed-Size: 427
Debian-Maintainer: Joel Klecker <ncurses-maint@debian.org>
Maintainer: Carl Worth <cworth@handhelds.org>
Filename: ./libncurses5_5.0-6.0potato1_arm.ipk
Size: 101390
MD5Sum: 6f1a19d05c5f8d312efb33e05318d714
Description: Shared libraries for terminal handling
 This package contains the shared libraries necessary to run programs
 compiled with ncurses.
Source: ncurses

Package: libpam0g
Priority: required
Section: base
Installed-Size: 152
Debian-Maintainer: Sam Hartman <hartmans@debian.org>
Maintainer: Carl Worth <cworth@handhelds.org>
Architecture: arm
Source: pam
Version: 0.72-21
Replaces: libpam0g-util
Depends: libc6 (>= 2.2.1-2), libpam-runtime
Suggests: libpam-doc
Conflicts: libpam0 (<= 0.56-2), libpam
Filename: ./libpam0g_0.72-21_arm.ipk
Size: 18191
MD5Sum: 21196b782a3327aa39382825db2d64f1
Description: Pluggable Authentication Modules library
 Contains the C shared library for Linux-PAM, a suite of shared
 libraries that enable the local system administrator to choose how
 applications authenticate users.  In other words, without rewriting
 or recompiling a PAM-aware application, it is possible to switch
 between the authentication mechanism(s) it uses.  One may entirely
 upgrade the local authentication system without touching the
 applications themselves.

Package: libpam-modules
Priority: required
Section: base
Installed-Size: 472
Debian-Maintainer: Sam Hartman <hartmans@debian.org>
Maintainer: Carl Worth <cworth@handhelds.org>
Architecture: arm
Source: pam
Version: 0.72-21
Replaces: libpam0g-util
Provides: libpam-motd, libpam-mkhomedir
Depends: libc6 (>= 2.2.1-2), libcap1, libdb3 (>= 3.2.9-1), libpam0g (>= 0.72-1)
Conflicts: libpam0g-modules (= 0.66-1), libpam-motd, libpam-mkhomedir, suidmanager (<< 0.50)
Filename: ./libpam-modules_0.72-21_arm.ipk
Size: 20438
MD5Sum: 23a98606804b0600dcc81ff26ad5772f
Description: Pluggable Authentication Modules for PAM
 This package completes the set of modules for PAM. It includes the
 the pam_unix_*.so module as well as some specialty modules.

Package: libpam-runtime
Priority: required
Section: base
Installed-Size: 132
Debian-Maintainer: Sam Hartman <hartmans@debian.org>
Maintainer: Carl Worth <cworth@handhelds.org>
Architecture: arm
Source: pam
Version: 0.72-21
Replaces: libpam0g-util, libpam0g-dev
Conflicts: libpam0g-util, libpam0g (<< 0.66-0)
Filename: ./libpam-runtime_0.72-21_arm.ipk
Size: 2495
MD5Sum: 183d85691a48163576f7b62e8cc43184
Description: Runtime support for the PAM library
 Contains the base setup for libpam

Package: libpng2
Priority: standard
Section: libs
Installed-Size: 288
Debian-Maintainer: Philippe Troin <phil@fifi.org>
Maintainer: Carl Worth <cworth@handhelds.org>
Architecture: arm
Source: libpng
Version: 1.0.8-1
Depends: libc6 (>= 2.1.2), libz1
Filename: ./libpng2_1.0.8-1_arm.ipk
Size: 74734
MD5Sum: ef8044db7824d9e486c6d9fb1c677168
Description: PNG library - runtime
 libpng is a library implementing an interface for reading and writing
 PNG (Portable Network Graphics) format files.
 .
 This library is more recent than libpng0g, and you should use it rather
 than libpng0g (which is for legacy packages).

Package: libpopt0
Priority: important
Section: base
Installed-Size: 92
Debian-Maintainer: Joseph Carter <knghtbrd@debian.org>
Maintainer: Carl Worth <cworth@handhelds.org>
Architecture: arm
Source: popt
Version: 1.5-0.1
Replaces: popt
Depends: libc6 (>= 2.1.2)
Conflicts: popt, libpopt-dev (<= 1.4-1)
Filename: ./libpopt0_1.5-0.1_arm.ipk
Size: 11129
MD5Sum: 9a43286e1b181448f36a1939d4cea530
Description: lib for parsing cmdline parameters
 Popt was heavily influenced by the getopt() and getopt_long() functions,
 but it allows more powerful argument expansion. It can parse arbitrary
 argv[] style arrays and automatically set variables based on command
 line arguments. It also allows command line arguments to be aliased via
 configuration files and includes utility functions for parsing arbitrary
 strings into argv[] arrays using shell-like rules.
 .
 This package contains the runtime library and locale data.

Package: libreadline4
Version: 4.1-1
Section: base
Priority: required
Architecture: arm
Depends: libc6 (>= 2.1.2), libncurses5
Installed-Size: 260
Debian-Maintainer: Matthias Klose <doko@debian.org>
Maintainer: Carl Worth <cworth@handhelds.org>
Filename: ./libreadline4_4.1-1_arm.ipk
Size: 67959
MD5Sum: bb6ad084c0b2b9b6251f43d5ddd2e28e
Description: GNU readline and history libraries, run-time libraries.
 The GNU readline library aids in the consistency of user interface
 across discrete programs that need to provide a command line
 interface.
 .
 The GNU history library provides a consistent user interface for
 recalling lines of previously typed input.
Source: readline4

Package: libssl0.9.6
Priority: optional
Section: non-us/main
Installed-Size: 1062
Debian-Maintainer: Christoph Martin <christoph.martin@uni-mainz.de>
Maintainer: Carl Worth <cworth@handhelds.org>
Architecture: arm
Source: openssl
Version: 0.9.6a-1
Replaces: libssl, libssl096
Provides: libssl096
Depends: libc6 (>= 2.2.1-2), libssl0.9.6
Conflicts: ssleay (<< 0.9.2b), libssl, openssl (<< 0.9.6-2), libssl096, libssl096-dev (<< 0.9.6-2)
Filename: ./libssl0.9.6_0.9.6a-1_arm.ipk
Size: 309622
MD5Sum: d1d6d8f48a48eb86f22e89f1a7f8dc06
Description: SSL shared libraries
 libssl and libcrypto shared libraries needed by programs like
 apache-ssl, telnet-ssl and openssh.
 .
 It is part of the OpenSSL implementation of SSL.

Package: libstdc++2.10-glibc2.2
Priority: required
Section: base
Installed-Size: 328
Debian-Maintainer: Debian GCC maintainers <gcc@packages.debian.org>
Maintainer: Carl Worth <cworth@handhelds.org>
Architecture: arm
Source: gcc-2.95 (2.95.4.ds1-0.010407)
Version: 1:2.95.4-0.010407
Depends: libc6 (>= 2.2.1-2)
Filename: ./libstdc++2.10-glibc2.2_2.95.4-0.010407_arm.ipk
Size: 161222
MD5Sum: 3d5c530f551cb14aaaccfcb2c221741f
Description: The GNU stdc++ library
 NOTE: This is not a final release, but taken from the CVS gcc-2_95-branch
 (dated 20010407).
 .
 This package contains an additional runtime library for C++ programs
 built with the GNU compiler.

Package: libungif3g
Priority: optional
Section: graphics
Installed-Size: 88
Debian-Maintainer: Adam Heath <doogie@debian.org>
Maintainer: Carl Worth <cworth@handhelds.org>
Architecture: arm
Source: libungif
Version: 3.0-3
Replaces: giflib3g
Provides: giflib3g
Depends: libc6 (>= 2.1.2), xlib6g (>= 3.3.6)
Conflicts: libgif3g, libgif2, giflib3g
Filename: ./libungif3g_3.0-3_arm.ipk
Size: 16148
MD5Sum: 65985228c87656161d3bdcfb1771185e
Description: shared library for GIF images (runtime lib)
 This is a shared library for working with GIF images.
 .
 The libungif library is a specially modified version of giflib which
 is free of the Unisys LZW patent.  It can read all GIFs, but only
 write uncompressed GIFs.  If you need to be able to write compressed
 GIFs, you can install the non-free giflib packages instead (which may
 not be available on CD).

Package: libwrap0
Priority: important
Section: base
Installed-Size: 136
Debian-Maintainer: Anthony Towns <ajt@debian.org>
Maintainer: Carl Worth <cworth@handhelds.org>
Architecture: arm
Source: tcp-wrappers
Version: 7.6-7
Depends: libc6 (>= 2.1.2)
Recommends: tcpd
Conflicts: netbase (<< 3.16-1)
Filename: ./libwrap0_7.6-7_arm.ipk
Size: 13202
MD5Sum: 18fd9d5e2f2e30652ee460aa1e97a5b1
Description: Wietse Venema's TCP wrappers library
 Wietse Venema's network logger, also known as TCPD or LOG_TCP.
 .
 These programs log the client host name of incoming telnet,
 ftp, rsh, rlogin, finger etc. requests. Security options are:
 access control per host, domain and/or service; detection of
 host name spoofing or host address spoofing; booby traps to
 implement an early-warning system.

Package: libxaw6
Priority: optional
Section: libs
Installed-Size: 372
Debian-Maintainer: Branden Robinson <branden@debian.org>
Maintainer: Carl Worth <cworth@handhelds.org>
Architecture: arm
Source: xfree86
Version: 4.0.2-13
Replaces: xlib6g (<< 4.0)
Depends: libc6 (>= 2.2.1-2), xlibs (>= 4.0.1-11)
Conflicts: xlib6g (<< 4.0)
Filename: ./libxaw6_4.0.2-13_arm.ipk
Size: 125255
MD5Sum: e5b9dbfc091f69133156ae0c53e80f43
Description: X Athena widget set library (version 6)
 Xaw is a widget set based on the the Xt (X Toolkit Intrinsics) library.
 It provides a set of graphical user-interface elements ("widgets") such as
 menus, scrollbars, dialog boxes, text-input areas, and so forth.  The X
 clients distributed with the X Window System itself, as well as many
 others, use the Athena widget set.
 .
 The version of the Athena widgets in this package corresponds to the
 X11R6.4 release of the X Window System.  XFree86 has made significant
 enhancements to the Athena widget set; their version can be found in the
 libxaw7 package.

Package: libxaw7
Priority: optional
Section: libs
Installed-Size: 484
Debian-Maintainer: Branden Robinson <branden@debian.org>
Maintainer: Carl Worth <cworth@handhelds.org>
Architecture: arm
Source: xfree86
Version: 4.1-1
Depends: libc6 (>= 2.2.1-2), xlibs (>= 4.0.1-11)
Filename: ./libxaw7_4.1-1_arm.ipk
Size: 158795
MD5Sum: fac4eea01562466274de330c3d180f6b
Description: X Athena widget set library
 Xaw is a widget set based on the the Xt (X Toolkit Intrinsics) library.
 It provides a set of graphical user-interface elements ("widgets") such as
 menus, scrollbars, dialog boxes, text-input areas, and so forth.  The X
 clients distributed with the X Window System itself, as well as many
 others, use the Athena widget set.
 .
 XFree86 has made a number of major improvements to the Athena widget set,
 resulting in version 7 -- this version features widgets customizable in
 appearance and event handling (a.k.a. "themes"); an extensible image
 loader (currently supports bitmaps, gradients, and pixmaps); numerous
 enhancements to the Text widget, text source and text sink objects; and
 multiple-column support in the SimpleMenu widget.
 .
 The older Athena widget library corresponding to version X11R6.4 of the X
 Window System can be found in the libxaw6 package.

Package: libxft
Priority: optional
Version: 1.0-1
Architecture: arm
Maintainer: Carl Worth <cworth@handhelds.org>
Depends: libc6
Filename: ./libxft_1.0-1_arm.ipk
Size: 43184
MD5Sum: 774b587da2b1e58a17b4e6475fa809ac
Description: libxft <needs better description here>

Package: libxml1
Priority: optional
Section: libs
Installed-Size: 480
Debian-Maintainer: Fredrik Hallenberg <hallon@debian.org>
Maintainer: Carl Worth <cworth@handhelds.org>
Architecture: arm
Source: libxml
Version: 1:1.8.11-1
Replaces: libxml0
Provides: libxml0
Depends: libc6 (>= 2.1.97), zlib1g (>= 1:1.1.3)
Conflicts: libxml0
Filename: ./libxml1_1.8.11-1_arm.ipk
Size: 122515
MD5Sum: ffc5f30c0e229aec973ba2dedf8bf38a
Description: GNOME XML library
 XML is a metalanguage to let you design your own markup language.
 A regular markup language defines a way to describe information in
 a certain class of documents (eg HTML). XML lets you define your
 own customized markup languages for many classes of document. It
 can do this because it's written in SGML, the international standard
 metalanguage for markup languages.

Package: libxmltok1
Priority: optional
Section: libs
Installed-Size: 176
Debian-Maintainer: Ardo van Rangelrooij <ardo@debian.org>
Maintainer: Carl Worth <cworth@handhelds.org>
Architecture: arm
Source: libxmltok
Version: 1.1-5
Depends: libc6 (>= 2.1.97)
Filename: ./libxmltok1_1.1-5_arm.ipk
Size: 36765
MD5Sum: 2669363932f3538598690504e8bd843b
Description: XML Parser Toolkit, runtime libraries
 Libraries for XML parsing in C, which contains the shared libraries,
 libxmltok and libxmlparser.  These libraries are being used, for
 instance, for XML support to Netscape 5 and the Perl module,
 XML::Parser.
 .
 Author:   James Clark <jjc@jclark.com>
 Homepage: http://www.jclark.com/xml/expat.html

Package: libxrender
Priority: optional
Version: 4.1-1
Architecture: arm
Maintainer: Carl Worth <cworth@handhelds.org>
Depends: libc6
Filename: ./libxrender_4.1-1_arm.ipk
Size: 7087
MD5Sum: f7593f5da37c45d5dbf30c76769537bf
Description: X rendering extension

Package: loadmeter
Priority: optional
Version: 0.0
Architecture: arm
Maintainer: Carl Worth <cworth@handhelds.org>
Depends: libc6, xlibs
Filename: ./loadmeter_0.0_arm.ipk
Size: 17294
MD5Sum: 68863f7c94238b4902722e9555a40f52
Description: graphical CPU load montitoring

Package: login
Essential: yes
Priority: required
Section: base
Installed-Size: 312
Debian-Maintainer: Ben Collins <bcollins@debian.org>
Maintainer: Carl Worth <cworth@handhelds.org>
Architecture: arm
Source: shadow
Version: 20000902-3.1
Replaces: shadow-login, shadow-passwd, shellutils (<< 2.0-2)
Depends: libpam-modules (>= 0.72-5)
Pre-Depends: libc6 (>= 2.2.1-2), libpam0g (>= 0.72-1)
Conflicts: shadow-login, pam-apps, secure-su, suidregister (<< 0.50)
Filename: ./login_20000902-3.1_arm.ipk
Size: 24402
MD5Sum: 7817225e43bb8e999f89c58152d23de4
Description: System login tools
 These tools are required to be able to login and use your system. The
 login program invokes you user shell and enables command execution. The
 newgrp program is used to change your effective group ID (useful for
 workgroup type situations). The su program allows changing your effective
 user ID (useful being able to execute commands as another user).
 .
 Also supplies a logout daemon that can place limits on when, from where,
 and for how long certain users can login to the system.

Package: lrzsz
Essential: yes
Priority: required
Section: comm
Installed-Size: 264
Debian-Maintainer: Josip Rodin <jrodin@jagor.srce.hr>
Maintainer: Carl Worth <cworth@handhelds.org>
Architecture: arm
Version: 0.12.21-4
Depends: libc6 (>= 2.2.1-2)
Suggests: minicom
Filename: ./lrzsz_0.12.21-4_arm.ipk
Size: 64893
MD5Sum: 6f1a0ea3c0bc986b96c916192fe318ab
Description: Tools for zmodem/xmodem/ymodem file transfer
 Lrzsz is a cosmetically modified zmodem/ymodem/xmodem package built
 from the public-domain version of Chuck Forsberg's rzsz package.
 .
 These programs use error correcting protocols ({z,x,y}modem) to send
 (sz, sx, sb) and receive (rz, rx, rb) files over a dial-in serial port
 from a variety of programs running under various operating systems.

Package: madplay
Priority: optional
Version: 0.0
Architecture: arm
Maintainer: Carl Worth <cworth@handhelds.org>
Depends: libc6
Filename: ./madplay_0.0_arm.ipk
Size: 70830
MD5Sum: 5ff68a920d656af9c8aaefaa1362a0f1
Description: Fast, high-quality, fixed-point MP3 player

Package: mingle
Priority: optional
Version: 0.1
Architecture: arm
Maintainer: Gareth J. Greenaway <gareth@wiked.org>
Depends: python
Filename: ./mingle_0.1_arm.ipk
Size: 51136
MD5Sum: 5954457eb75f93c38f941d283ea05f50
Description: Mingle contact manager illustrating the use of the Familiar Framework project. 

Package:  mipv6-bits
Priority:  optional
Version:  1.0
Architecture:  arm
Maintainer:  steven.ayer@compaq.com
Depends:  familiar v0.4
Filename: ./mipv6-bits_1.0_arm.ipk
Size: 1827559
MD5Sum: 0ec098ef0308e1e50d816e12c6540336
Description:  kernel modules, conf files, and luxuries for
	      facilitating mobile ipv6 under linux 2.4.3-rmk2-np1 on ipaq


Package: mixer
Priority: optional
Version: 0.0
Architecture: arm
Maintainer: Carl Worth <cworth@handhelds.org>
Depends: libc6, xlibs
Filename: ./mixer_0.0_arm.ipk
Size: 8729
MD5Sum: 50d2997c142037603450e53c6af14bf6
Description: control audio levels graphically

Package: modutils
Priority: required
Section: base
Installed-Size: 564
Debian-Maintainer: Wichert Akkerman <wakkerma@debian.org>
Maintainer: Carl Worth <cworth@handhelds.org>
Architecture: arm
Version: 2.4.2-1
Replaces: manpages (<=1.15-3)
Depends: libc6 (>= 2.1.97), sysvinit (>=2.71-2)
Suggests: ksymoops
Filename: ./modutils_2.4.2-1_arm.ipk
Size: 113605
MD5Sum: 8046533303655791c7c1a16f76224346
Description: Linux module utilities.
 These utilities are intended to make a Linux modular kernel
 manageable for all users, administrators and distribution
 maintainers.
Origin: debian
Bugs: debbugs://bugs.debian.org/

Package: mount
Essential: yes
Priority: required
Section: base
Installed-Size: 228
Debian-Maintainer: Adrian Bunk <bunk@fs.tum.de>
Maintainer: Carl Worth <cworth@handhelds.org>
Architecture: arm
Source: util-linux
Version: 2.11b-2
Pre-Depends: libc6 (>= 2.2.1-2)
Filename: ./mount_2.11b-2_arm.ipk
Size: 41072
MD5Sum: ddc0df15fb6d3aac711d0a77172df6c2
Description: Tools for mounting and manipulating filesystems.
 This package provides the mount(8), umount(8), swapon(8),
 swapoff(8), and losetup(8) commands.

Package: ncurses-base
Priority: required
Section: base
Installed-Size: 222
Debian-Maintainer: Daniel Jacobowitz <ncurses-maint@debian.org>
Maintainer: Carl Worth <cworth@handhelds.org>
Architecture: all
Source: ncurses
Version: 5.2.20010318-1
Replaces: ncurses-term
Provides: ncurses-runtime
Conflicts: ncurses, ncurses-runtime
Filename: ./ncurses-base_5.2.20010318-1_all.ipk
Size: 8901
MD5Sum: 67746347774792cff7d97adf0ff4c272
Description: Descriptions of common terminal types
 This package contains what should be a reasonable subset of terminal
 definitions, including: ansi, dumb, linux, rxvt, screen, sun, vt100,
 vt102, vt220, vt52, and xterm.

Package: netbase
Priority: important
Section: base
Installed-Size: 110
Debian-Maintainer: Anthony Towns <ajt@debian.org>
Maintainer: Carl Worth <cworth@handhelds.org>
Architecture: all
Version: 4.05
Depends: net-tools | iproute, ifupdown, ipchains | ipfwadm | iptables, netkit-inetd, tcpd, netkit-ping | iputils-ping
Suggests: debconf, ipmasqadm | ipautofw | iptables, portmap, netkit-rpc
Conflicts: xinetd (<= 2.2.1-8), netstd (<< 3.00), nfs-user-server (<< 2.2beta47-9), nis (<= 3.6-2), rstatd (<= 3.03-3), rwalld (<= 0.16-1), rusersd (<= 0.17-1), ugidd (<< 2.2beta47-9)
Filename: ./netbase_4.05_all.ipk
Size: 9502
MD5Sum: 029f1dffa57f6b23f97b08b5262dfc38
Description: Basic TCP/IP networking system
 This package provides the necessary infrastructure for basic TCP/IP based
 networking.

Package: netcat
Priority: optional
Section: net
Installed-Size: 228
Debian-Maintainer: Decklin Foster <decklin@red-bean.com>
Maintainer: Carl Worth <cworth@handhelds.org>
Architecture: arm
Version: 1.10-17
Depends: libc6 (>= 2.2.1-2)
Filename: ./netcat_1.10-17_arm.ipk
Size: 12265
MD5Sum: 14101b949ee963abb64de99130725c6f
Description: TCP/IP swiss army knife
 A simple Unix utility which reads and writes data across network
 connections using TCP or UDP protocol.  It is designed to be a reliable
 "back-end" tool that can be used directly or easily driven by other
 programs and scripts. At the same time it is a feature-rich network
 debugging and exploration tool, since it can create almost any kind of
 connection you would need and has several interesting built-in
 capabilities.

Package: netkit-ping
Priority: important
Section: net
Installed-Size: 84
Debian-Maintainer: Anthony Towns <ajt@debian.org>
Maintainer: Carl Worth <cworth@handhelds.org>
Architecture: arm
Source: netkit-base
Version: 0.10-6.1
Replaces: netbase (<< 4.00)
Provides: ping
Depends: libc6 (>= 2.2.1-2)
Conflicts: ping
Filename: ./netkit-ping_0.10-6.1_arm.ipk
Size: 10418
MD5Sum: cdf51bd27a0e95867f1ee7ab7c328192
Description: The ping utility from netkit
 The ping command sends ICMP ECHO_REQUEST packets to a host in order to
 test if the host is reachable via the network.

Package: net-tools
Priority: important
Section: net
Installed-Size: 676
Debian-Maintainer: Bernd Eckenfels <ecki@debian.org>
Maintainer: Carl Worth <cworth@handhelds.org>
Architecture: arm
Version: 1.59-1
Replaces: netbase (<< 4.00)
Depends: libc6 (>= 2.2.1-2)
Filename: ./net-tools_1.59-1_arm.ipk
Size: 100555
MD5Sum: 5f8cd79e32b953142faed78f46dd5625
Description: The NET-3 networking toolkit
 This package includes the important tools for controlling the network
 subsystem of the Linux kernel.  This includes arp, ifconfig, netstat,
 rarp, nameif and route.  Additionally, this package contains utilities
 relating to particular network hardware types (plipconfig, slattach) and
 advanced aspects of IP configuration (iptunnel, ipmaddr).
 .
 In the upstream package 'hostname' and friends are included. Those are
 not installed by this package, since there is a special "hostname*.deb".

Package: ntpdate
Priority: optional
Section: net
Installed-Size: 132
Debian-Maintainer: Bdale Garbee <bdale@gag.com>
Maintainer: Carl Worth <cworth@handhelds.org>
Architecture: arm
Source: ntp
Version: 1:4.0.99g-3
Replaces: ntp (<< 4.0.98a),xntp,xntp3
Depends: libc6 (>= 2.2.1-2)
Suggests: ntp
Conflicts: ntp (<< 4.0.98a),chrony
Filename: ./ntpdate_4.0.99g-3_arm.ipk
Size: 22995
MD5Sum: 628963690db28b96a036356abcee8860
Description: The ntpdate client for setting system time from NTP servers.
 The ntpdate client allows a system's clock to be set to match the time
 obtained by communicating with one or more servers running the NTP protocol.
 .
 The use of ntpdate is optional if you're running the ntp package, it can help
 a system obtain lock if it starts with a time that's pretty close by using
 ntpdate before starting the daemon.
 .
 The ntpdate client by itself is useful for occasionally setting the time on
 machines that are not on the net full-time, such as laptops.

Package: ohphone
Priority: optional
Version:  0.0-1
Architecture: arm
Maintainer: Jamey Hicks <jamey.hicks@compaq.com>
Depends:
Filename: ./ohphone_0.0-1_arm.ipk
Size: 2709525
MD5Sum: e548a0d59aa2bf1938dbecb926a26bf7
Description: H.323 Voice and Video Conferencing

Package: backpaq-firmware
Priority: required
Version:  6A5F
Architecture: arm
Maintainer: Brian Avery <brian.avery@compaq.com>
Packager: Jamey Hicks <jamey.hicks@compaq.com>
Depends:
Filename: ./oldipkgs/backpaq-firmware_6A5F_arm.ipk
Size: 44391
MD5Sum: e423db043b360def5a5ce58b146c743c
Description: BackPAQ FPGA Firmware

Package: familiar-base
Essential: yes
Priority: required
Version: 0.10-1
Architecture: arm
OriginalMaintainer: Alexander Guy <a7r@handhelds.org>
Maintainer: Jamey Hicks <jamey.hicks@compaq.com>
Depends: sysvinit (>= 2.72)
Pre-Depends: libc6 (>= 2.1.97)
Filename: ./oldipkgs/familiar-base_0.10-1_arm.ipk
Size: 16804
MD5Sum: 10695004fc77179410b307c344196e3b
Description: essential files for a familiar installation
  This package is a bit of a catch-all for files that need to be
  installed with familiar, (I made this package from everything that
  was still left over after I split off the rest of the files from
  familiar v0.4 bleeding into their own packages) . Much of what it is
  here is simply emty directories that must exist. Also, there are
  some files here which may be created by scripts in Debian that we
  are not yet runnging. There are probably several files here that
  should move to other packages.

Package: hotplug
Priority: required
Version:  1.2
Architecture: arm
Maintainer: Jamey Hicks <jamey.hicks@compaq.com>
Depends: backpaq-firmware
Filename: ./oldipkgs/hotplug_1.2_arm.ipk
Size: 4899
MD5Sum: 65d66bf27e1ab2a4bb60d1bc18bb3da9
Description: Hotplug add/removal scripts for H3600 and BackPAQ

Package: oneko
Priority: optional
Version:  1.1
Architecture: arm
Maintainer: Andrew Christian <andrew.christian@compaq.com>
Depends:
Filename: ./oneko_1.1_arm.ipk
Size: 25833
MD5Sum: 9bdc246c5433d4b118436b331080598a
Description: Chase the mouse demo for the Mercury BackPAQ

Package: pcmcia-cs
Priority: extra
Version: 0.0-fam3-1
Architecture: arm
Maintainer: Carl Worth <cworth@handhelds.org>
Maintainer: Jamey Hicks <jamey.hicks@compaq.com>
Depends: libc6 (>= 2.2.1-2), modutils, psmisc
Suggests: pcmcia-modules, xlibs (>= 4.0.1-11)
Filename: ./pcmcia-cs_0.0-fam3-1_arm.ipk
Size: 57533
MD5Sum: f5a953626ccca76bd47a6cd42f03b9c1
Description: PCMCIA Card Services for Linux.
 NOTE: I couldn't find this package in Debian/arm so I just grabbed
 the control file from my Debian/i386 and combined it with the
 pcmcia-cs bits from familiar v0.4 bleeding. A better solution would
 be to rebuild the real .deb from the pcmcia-cs source.
 .
 PCMCIA cards are commonly used in laptops to provide expanded
 capabilities, such as modems, increased memory, etc.  Some desktop PCs
 can accept PCMCIA cards as well, although this is rare.
 .
 Card Services for Linux is a complete PCMCIA support package.  It
 includes a set of client drivers for specific cards, and a card
 manager daemon that can respond to card insertion and removal events,
 loading and unloading drivers on demand.  It supports ``hot swapping''
 of PCMCIA cards, so cards can be inserted and ejected at any time.
 .
 The actual kernel modules required for this package are contained in
 the pcmcia-modules-<kernel version> package, where <kernel version> is
 the version of the kernel for which the modules have been compiled.

Package: pcmcia-modules-2.4.3-rmk2-np1
Priority: extra
Maintainer: Alexander Guy <a7r@andern.org>
Depends: kernel-modules-2.4.3-rmk2-np1, pcmcia-cs
Version: fam3
Architecture: arm
Filename: ./pcmcia-modules-2.4.3-rmk2-np1_fam3_arm.ipk
Size: 111546
MD5Sum: 95da695ec0792cdb70b86aaf5eb48e7c
Description: PCMCIA kernel modules
 The full collection of PCMCIA kernel modules from pcmcia-cs. Install
 this if you will be plugging any Compact Flash or PCMCIA cards into
 your computer.
 .
 We may want to split these up into many fine-grained packages.

Package: pcmcia-modules-2.4.4-rmk3-np1
Priority: extra
Maintainer: Alexander Guy <a7r@andern.org>
Depends: kernel-modules-2.4.4-rmk3-np1, pcmcia-cs
Version: 1
Architecture: arm
Filename: ./pcmcia-modules-2.4.4-rmk3-np1_1_arm.ipk
Size: 137395
MD5Sum: dbff29eb0b4e6d7fa7bf91f9eb36a39f
Description: PCMCIA kernel modules
 The full collection of PCMCIA kernel modules from pcmcia-cs. Install
 this if you will be plugging any Compact Flash or PCMCIA cards into
 your computer.
 .
 We may want to split these up into many fine-grained packages.

Package: ppp
Priority: standard
Section: base
Installed-Size: 764
Debian-Maintainer: Michael Beattie <mjb@debian.org>
Maintainer: Carl Worth <cworth@handhelds.org>
Architecture: arm
Version: 2.4.0f-1
Replaces: ppp-pam
Depends: libc6 (>= 2.1.2), libpam0g, libpam-modules, netbase, sysvinit (>= 2.75-4)
Suggests: debconf
Conflicts: ppp-pam
Filename: ./ppp_2.4.0f-1_arm.ipk
Size: 96430
MD5Sum: 2bd0da8e83b6d609a4a5dc498564ce06
Description: Point-to-Point Protocol (PPP) daemon.
 The Point-to-Point Protocol (PPP) provides a standard way to transmit
 datagrams over a serial link, as well as a standard way for the machines
 at either end of the link (the "peers") to negotiate various optional
 characteristics of the link.  Using PPP, a serial link can be used to
 transmit Internet Protocol (IP) datagrams, allowing TCP/IP connections
 between the peers.
 .
 This package contains pppd with PAM support built-in, so `ppp-pam'
 package is obsolete.

Package: procps
Priority: required
Section: base
Installed-Size: 484
Debian-Maintainer: Craig Small <csmall@debian.org>
Maintainer: Carl Worth <cworth@handhelds.org>
Architecture: arm
Version: 1:2.0.7-4
Replaces: watch, bsdutils (<< 2.9x-1)
Provides: watch
Depends: libc6 (>= 2.2.1-2), libncurses5
Recommends: psmisc
Conflicts: watch, libproc-dev (<< 1:1.2.6-2), w-bassman (<< 1.0-3), procps-nonfree, pgrep (<< 3.3-5)
Filename: ./procps_2.0.7-4_arm.ipk
Size: 46669
MD5Sum: 374592eb63c1100ebded8c4129954cc3
Description: The /proc file system utilities.
 These are utilities to browse the /proc filesystem, which is not a real file
 system but a way for the kernel to provide information about the status of
 entries in its process table. (e.g. running, stopped or "zombie")
 Both command line and full screen utilities are provided. Ncurses is needed
 for the full screen utilities.

Package: profiling-daemon
Priority: optional
Version:  1.1
Architecture: arm
Maintainer: Debby Wallach <debby.wallach@compaq.com>
Packager: Jamey Hicks <jamey.hicks@compaq.com>
Depends:
Filename: ./profiling-daemon_1.1_arm.ipk
Size: 22972
MD5Sum: 9d9c2f9e225840983cc5f2b67b98150a
Description: Daemon for the sampling profile for ARM Linux

Package: pump
Priority: optional
Section: base
Installed-Size: 144
Debian-Maintainer: Steve Dunham <dunham@debian.org>
Maintainer: Carl Worth <cworth@handhelds.org>
Architecture: arm
Version: 0.8.3-3
Replaces: pump-udeb
Depends: libc6 (>= 2.1.97)
Conflicts: dhcpcd, dhcpcd-sv, pump-udeb
Filename: ./pump_0.8.3-3_arm.ipk
Size: 25830
MD5Sum: 1f0b17323498f46c111531b03df1153d
Description: Simple DHCP/BOOTP client.
 This is the DHCP/BOOTP client written by RedHat.

Package: pyditor
Priority: optional
Version: 0.0
Architecture: arm
Maintainer: Carl Worth <cworth@handhelds.org>
Depends: python
Filename: ./pyditor_0.0_arm.ipk
Size: 1444
MD5Sum: c7209f99c5036c9ece32918905086cc5
Description: python-based text editor

Package: python
Priority: optional
Version: 0.0
Architecture: arm
Maintainer: Carl Worth <cworth@handhelds.org>
Depends: libc6, libdb2
Filename: ./python_0.0_arm.ipk
Size: 834371
MD5Sum: 30aaff82d29a7ed787f7d288c8743794
Description: python of course <needs real description>

Package: qiv
Priority: extra
Section: graphics
Installed-Size: 86
Debian-Maintainer: Mitch Blevins <mblevin@debian.org>
Maintainer: Carl Worth <cworth@handhelds.org>
Architecture: arm
Version: 1.6-1
Depends: gdk-imlib1 (>= 1.9.8.1-2), libc6 (>= 2.1.97), libglib1.2 (>= 1.2.0), libgtk1.2 (>= 1.2.8-3), xlibs (>= 4.0.1-11)
Filename: ./qiv_1.6-1_arm.ipk
Size: 15767
MD5Sum: 877b1dc63c32b1f468a20a7ade4818f5
Description: a quick image viewer for X
 Quick Image Viewer (qiv) is a very small and pretty fast GDK/Imlib
 image viewer.  Features include zoom, maxpect, scale down, fullscreen,
 brightness/contrast/gamma correction, slideshow, flip,
 horizontal/vertical, rotate left/right, delete (move to .qiv-trash/),
 jump to image x, jump forward/backward x images, filename filter and
 you can use qiv to set your X11-Desktop background.

Package: reiserfs-module
Priority: optional
Section: kernel
Installed-Size: 249337
Debian-Maintainer: Nicols Lichtmaier <nick@debian.org>
Maintainer: Carl Worth <cworth@handhelds.org>
Architecture: arm
Version: 2.4.3-rmk2-np1
Depends: modutils, kernel-image (= 2.4.3-rmk2-np1)
Filename: ./reiserfs-module_2.4.3-rmk2-np1_arm.ipk
Size: 105581
MD5Sum: 7947c768a934075e7d68ee8eaf5e4295
Description: Reiserfs is a journaling filesystem. This is the kernel module for it. 

Package: rsync
Priority: optional
Section: net
Installed-Size: 280
Debian-Maintainer: Philip Hands <phil@hands.com>
Maintainer: Carl Worth <cworth@handhelds.org>
Architecture: arm
Version: 2.4.6-1
Depends: libc6 (>= 2.1.2)
Suggests: ssh
Filename: ./rsync_2.4.6-1_arm.ipk
Size: 74003
MD5Sum: ce2d8f8672994f93bb03c38919fdb504
Description: fast remote file copy program (like rcp)
 rsync is a program that allows files to be copied to and from remote
 machines in much the same way as rcp.  It has many more options than
 rcp, and  uses the  rsync remote-update protocol to greatly speedup
 file transfers when the destination file already exists.
 .
 The rsync remote-update protocol allows rsync to transfer just the
 differences between two sets of files across the network link.

Package: rxvt
Priority: optional
Section: x11
Installed-Size: 580
Debian-Maintainer: Brian Mays <brian@debian.org>
Maintainer: Carl Worth <cworth@handhelds.org>
Architecture: arm
Version: 1:2.6.3-8-fam1
Provides: x-terminal-emulator
Depends: libc6 (>= 2.1.97), xlibs (>= 4.0.1-11), base-passwd (>= 2.0.3.4)
Conflicts: suidmanager (<< 0.50)
Filename: ./rxvt_2.6.3-8-fam1_arm.ipk
Size: 40759
MD5Sum: e514f9093a45e8a95db37123a193b974
Description: VT102 terminal emulator for the X Window System
 Rxvt is an 8-bit clean, color xterm replacement that uses significantly
 less memory than a conventional xterm, mostly since it doesn't support
 toolkit configurability or Tek graphics, but also since features can
 be removed at compile-time to reflect your needs.
 .
 The distribution also includes rclock, the smaller/better xclock
 replacement with appointment scheduling and xbiff functionality.

Package: rxvt-aa
Priority: optional
Section: x11
Installed-Size: 580
Maintainer: Carl Worth <cworth@handhelds.org>
Architecture: arm
Version: 1:2.6.3-8
Provides: x-terminal-emulator
Depends: libc6 (>= 2.1.97), xlibs (>= 4.0.1-11), base-passwd (>= 2.0.3.4), libxft, libxrender
Conflicts: suidmanager (<< 0.50)
Filename: ./rxvt-aa_2.6.3-8_arm.ipk
Size: 42018
MD5Sum: c042c85c082d043aa5a58d4c62c67b70
Description: rxvt with support for anti-aliased fonts
 This package proves an rxvt terminal with support for anti-aliased fonts.
 .
 Rxvt is an 8-bit clean, color xterm replacement that uses significantly
 less memory than a conventional xterm, mostly since it doesn't support
 toolkit configurability or Tek graphics, but also since features can
 be removed at compile-time to reflect your needs.
 .
 The distribution also includes rclock, the smaller/better xclock
 replacement with appointment scheduling and xbiff functionality.

Package: screen
Priority: optional
Version: 3.9.8
Architecture: arm
Maintainer: Brian Kearns <bdkearns@bdkearns.net>
Depends: ncurses-base, libncurses5, libc6
Filename: ./screen_3.9.8_arm.ipk
Size: 134749
MD5Sum: 80b9bb7de6b30ecdeadc04f0bcda875a
Description: Console manager

Package: script-test
Priority: optional
Version: 0.0
Architecture: all
Maintainer: Carl Worth <cworth@handhelds.org>
Depends:
Filename: ./script-test_0.0_all.ipk
Size: 820
MD5Sum: ea6b272ff25bb69482a9907492b316a0
Description: Empty test for ipkg script support

Package: sed
Priority: required
Section: base
Installed-Size: 180
Debian-Maintainer: Wichert Akkerman <wakkerma@debian.org>
Maintainer: Carl Worth <cworth@handhelds.org>
Architecture: arm
Version: 3.02-6
Pre-Depends: libc6 (>= 2.1.2)
Filename: ./sed_3.02-6_arm.ipk
Size: 12338
MD5Sum: c893daf6fef70813b566db8ed8c06950
Description: The GNU sed stream editor.
 sed reads the specified files or the standard input if no
 files are specified, makes editing changes according to a
 list of commands, and writes the results to the standard
 output.

Package: shellutils
Essential: yes
Priority: required
Section: base
Installed-Size: 2152
Debian-Maintainer: Michael Stone <mstone@debian.org>
Maintainer: Carl Worth <cworth@handhelds.org>
Architecture: arm
Version: 2.0.11-5
Replaces: bsdutils (<= 3.0-2), util-linux (<< 2.9e-0.1)
Pre-Depends: libc6 (>= 2.2.1-2), login | hurd
Conflicts: login (<< 19990827-1)
Filename: ./shellutils_2.0.11-5_arm.ipk
Size: 123564
MD5Sum: a9a70a1fd2e2057ed43e5a069d521d0d
Description: The GNU shell programming utilities.
 The utilities: basename chroot date dirname echo env expr factor false groups
 hostid id logname nice nohup pathchk pinky printenv printf pwd seq sleep stty
 tee test true tty uname users who whoami yes.

Package: slang1
Priority: optional
Section: libs
Installed-Size: 456
Debian-Maintainer: Jim Mintha <jmintha@debian.org>
Maintainer: Carl Worth <cworth@handhelds.org>
Architecture: arm
Source: slang
Version: 1.4.4-1
Depends: libc6 (>= 2.2.1-2)
Filename: ./slang1_1.4.4-1_arm.ipk
Size: 159766
MD5Sum: 775f054fdda315ef73afc9399612a7ad
Description: The S-Lang programming library - runtime version.
 S-Lang is a C programmer's library that includes routines for the rapid
 development of sophisticated, user friendly, multi-platform applications.
 .
 This package contains only the shared library libslang.so.* and copyright
 information. It is only necessary for programs that use this library (such
 as jed and slrn). If you plan on doing development with S-Lang, you will
 need the companion -dev package as well.


Package: ssh
Priority: optional
Section: non-US
Installed-Size: 1020
Debian-Maintainer: Philip Hands <phil@hands.com>
Maintainer: Carl Worth <cworth@handhelds.org>
Architecture: arm
Source: openssh
Version: 1:2.5.2p2-2
Depends: libc6 (>= 2.2.1-2), libpam0g (>= 0.72-1), libssl0.9.6, libwrap0, zlib1g (>= 1:1.1.3), libpam-modules (>= 0.72-9), libwrap0 (>= 7.6-1.1)
Suggests: ssh-askpass, debconf, xbase-clients, dpkg (>= 1.8.3.1)
Conflicts: ssh-nonfree, ssh-socks, ssh2, debconf (<< 0.2.17), debconf-tiny (<< 0.2.17), sftp, rsh-client (<< 0.16.1-1)
Filename: ./ssh_2.5.2p2-2_arm.ipk
Size: 210692
MD5Sum: 1fe9ccb1693d36d4388758f73f041d9b
Description: Secure rlogin/rsh/rcp replacement (OpenSSH)
 OpenSSH is derived from OpenBSD's version of ssh, which was in turn
 derived from ssh code from before the time when ssh's license was
 changed to be non-free.
 Ssh (Secure Shell) is a program for logging into a remote machine
 and for executing commands on a remote machine.
 It provides secure encrypted communications between two untrusted
 hosts over an insecure network.  X11 connections and arbitrary TCP/IP
 ports can also be forwarded over the secure channel.
 It is intended as a replacement for rlogin, rsh and rcp, and can be
 used to provide rdist, and rsync with a secure communication channel.
 .
 --------------------------------------------------------------------
 .
 This software may be freely imported into the United States; however,
 the United States Government may consider re-exporting it a criminal
 offense.  Thus, if you are outside the US, please retrieve this
 software from outside the US.
 In some countries, particularly Russia, Iraq, Pakistan, and France, it
 may be illegal to use any encryption at all without a special permit.

Package: stowaway-h3600
Priority: optional
Version: 1.0
Architecture: arm
Maintainer: Carl Worth <cworth@handhelds.org>
Depends: libc6
Filename: ./stowaway-h3600_1.0_arm.ipk
Size: 15470
MD5Sum: 67c0f14bf6a5e523ed7a95b6fca02a79
Description: Support for the iPAQ H3600 series Stowaway keyboard

Package: sysset
Priority: optional
Version: 0.0
Architecture: arm
Maintainer: Carl Worth <cworth@handhelds.org>
Depends: python
Filename: ./sysset_0.0_arm.ipk
Size: 2878
MD5Sum: 5124d246b5b7da481874f97fb86c859f
Description: python utility for configuring system settings

Package: sysvinit
Essential: yes
Priority: required
Section: base
Installed-Size: 207
Debian-Maintainer: Miquel van Smoorenburg <miquels@cistron.nl>
Maintainer: Carl Worth <cworth@handhelds.org>
Architecture: arm
Version: 2.78-4
Replaces: last, bsdutils (<=2.0-2)
Depends: dpkg (>= 1.4.0.21), mount (>= 2.7i-1), util-linux (>= 2.9t-2), e2fsprogs (>= 1.15-1)
Pre-Depends: libc6 (>= 2.1.2)
Conflicts: last, file-rc (<= 0.4.2), kbd (<< 0.95-2), mdutils (<< 0.35-9)
Filename: ./sysvinit_2.78-4_arm.ipk
Size: 43771
MD5Sum: ebf719f849e02d9bdfd66f54e129398e
Description: System-V like init.
 Init is the first program to run after your system is booted, and
 continues to run as process number 1 until your system halts. Init's
 job is to start other programs that are essential to the operation of
 your system. All processes are descended from init. For more information,
 see the manual page init(8).

Package: tar
Essential: yes
Priority: required
Section: base
Installed-Size: 1064
Debian-Maintainer: Bdale Garbee <bdale@gag.com>
Maintainer: Carl Worth <cworth@handhelds.org>
Architecture: arm
Version: 1.13.19-1
Pre-Depends: libc6 (>= 2.1.97)
Suggests: bzip2
Filename: ./tar_1.13.19-1_arm.ipk
Size: 67084
MD5Sum: 4f93d22d8645b86b6fb49c375254045e
Description: GNU tar
 Tar is a program for packaging a set of files as a single archive in tar
 format.  The function it performs is conceptually similar to cpio, and to
 things like pkzip in the DOS world.  It is heavily used by the Debian package
 management system, and is useful for performing system backups and exchanging
 sets of files with others.

Package: task-bootstrap
Priority: optional
Version: 0.6-1
Architecture: arm
Original-Maintainer: Alexander Guy <a7r@handhelds.org>
Maintainer: Jamey Hicks <jamey.hicks@compaq.com>
Depends: ssh, ppp, kernel-modules-2.4.4-rmk3-np1, pcmcia-modules-2.4.4-rmk3-np1, wireless-tools, pump, hotplug
Filename: ./task-bootstrap_0.6-1_arm.ipk
Size: 1165
MD5Sum: b9c6f9d48803ea9a7c85090a690e5ad6
Description: Everything you might need to bootstrap a minimal ipkg system.

Package: task-demo-complete
Priority: optional
Version: 1
Architecture: arm
Maintainer: Jamey Hicks <jamey.hicks@compaq.com>
Depends: hotplug, oneko, checkers, cpu-scale-2.4.3-rmk2-np1, dosfstools, fscrib, h3600-utils, libglade0, libpopt0, libxaw6, libxml1, libxmltok1, loadmeter, ncurses-base, netcat, ntpdate, pcmcia-modules-2.4.3-rmk2-np1, procps, ppp, pump, pyditor, qiv, rsync, ssh, sysset, xvkbd, task-mp3-player, task-games, task-wireless, task-x
Filename: ./task-demo-complete_1_arm.ipk
Size: 1809
MD5Sum: d937abcf24424c0efe914a5a888f6692
Description: Task package for a complete Mercury project demo system

Package: task-familiar-complete
Priority: optional
Version: 0.5
Architecture: arm
Maintainer: Carl Worth <cworth@handhelds.org>
Depends: apmd, checkers, cpu-scale-2.4.3-rmk2-np1, dosfstools, fscrib, h3600-utils, libglade0, libpopt0, libxaw6, libxml1, libxmltok1, loadmeter, ncurses-base, netcat, ntpdate, pcmcia-modules-2.4.3-rmk2-np1, procps, ppp, pump, pyditor, qiv, rsync, ssh, sysset, xvkbd, task-mp3-player, task-games, task-wireless, task-x
Filename: ./task-familiar-complete_0.5_arm.ipk
Size: 808
MD5Sum: f117049d5863f2e70d9903f9bc83475e
Description: Task package for a complete familiar system

Package: task-games
Priority: optional
Version: 0.0
Architecture: arm
Maintainer: Carl Worth <cworth@handhelds.org>
Depends: checkers
Filename: ./task-games_0.0_arm.ipk
Size: 994
MD5Sum: 48f5a22131a2f4aada009620b1242438
Description: Task package for a complete familiar system

Package: task-mp3-player
Priority: optional
Version: 0.0
Architecture: arm
Maintainer: Carl Worth <cworth@handhelds.org>
Depends: madplay, mixer
Filename: ./task-mp3-player_0.0_arm.ipk
Size: 667
MD5Sum: aa5f5c85ccb22af9c4f6f677522df9e7
Description: Task package for a complete familiar system

Package: task-wireless
Priority: optional
Version: 0.1
Architecture: arm
Maintainer: Carl Worth <cworth@handhelds.org>
Depends: wireless-tools, pcmcia-modules-2.4.3-rmk2-np1
Filename: ./task-wireless_0.1_arm.ipk
Size: 639
MD5Sum: 988d6d2960bf165b5ed324dbfb85d674
Description: Task package for wireless networking

Package: task-x
Priority: optional
Version: 0.0
Architecture: arm
Maintainer: Carl Worth <cworth@handhelds.org>
Depends: xserver-tiny-h3600, xbase-clients, xfonts-base, xfonts-75dpi, xfonts-ttf, blackbox, rxvt-aa, xcalibrate
Filename: ./task-x_0.0_arm.ipk
Size: 739
MD5Sum: 78d7c74c9fdac90f3b58fba7231a4ff8
Description: Task package for a basic X system

Package: textutils
Essential: yes
Priority: required
Section: base
Installed-Size: 1550
Debian-Maintainer: Herbert Xu <herbert@debian.org>
Maintainer: Carl Worth <cworth@handhelds.org>
Architecture: arm
Version: 2.0-3
Replaces: bsdmainutils (<= 4.5.2), ptx
Provides: ptx
Pre-Depends: libc6 (>= 2.1.2)
Conflicts: ptx
Filename: ./textutils_2.0-3_arm.ipk
Size: 156555
MD5Sum: fbdac4eb344aea6287461bc8dc613add
Description: The GNU text file processing utilities.
 The utilities: cat cksum comm csplit cut expand fmt fold head join md5sum
 nl od paste pr ptx sort split sum tac tail tr tsort unexpand uniq wc.

Package: util-linux
Essential: yes
Priority: required
Section: base
Installed-Size: 840
Debian-Maintainer: Adrian Bunk <bunk@fs.tum.de>
Maintainer: Carl Worth <cworth@handhelds.org>
Architecture: arm
Version: 2.11b-2-fam2
Replaces: miscutils, setterm, getty, fdisk
Pre-Depends: libc6 (>= 2.2.1-2), libncurses5 (>= 5.2.20010310-1) 
Recommends: util-linux-locales
Suggests: kbd | console-tools
Conflicts: setterm, getty, fdisk, kbd (<< 1.05-3), console-tools (<< 1:0.2.3-21)
Filename: ./util-linux_2.11b-2-fam2_arm.ipk
Size: 9771
MD5Sum: e1abcd568a156976ac95eff239dbb091
Description: Miscellaneous system utilities.
 A mixed bag of system utilities: arch chkdupexe cfdisk cytune dmesg
 fdisk fsck.minix getty getopt hwclock ipcrm ipcs mcookie mkfs mkfs.minix
 mkswap more namei pivot_root raw rdev setterm setsid tunelp whereis.

Package: wget
Priority: optional
Section: web
Installed-Size: 1272
Debian-Maintainer: Nicols Lichtmaier <nick@debian.org>
Maintainer: Carl Worth <cworth@handhelds.org>
Architecture: arm
Version: 1.6-2
Depends: libc6 (>= 2.2.1-2), netbase
Filename: ./wget_1.6-2_arm.ipk
Size: 62824
MD5Sum: bbc13feb01f63a86cb6a542bf629cc77
Description: utility to retrieve files from the WWW via HTTP and FTP
 Wget [formerly known as Geturl] is a freely available network utility
 to retrieve files from the World Wide Web using HTTP and FTP, the two
 most widely used Internet protocols.  It works non-interactively, thus
 enabling work in the background, after having logged off.
 .
 The recursive retrieval of HTML pages, as well as FTP sites is
 supported -- you can use Wget to make mirrors of archives and home
 pages, or traverse the web like a WWW robot (Wget understands
 /robots.txt).

Package: wireless-tools
Priority: optional
Section: net
Installed-Size: 120
Debian-Maintainer: Bjrn Andersson <bjorn@lifix.fi>
Maintainer: Carl Worth <cworth@handhelds.org>
Architecture: arm
Version: 20-1.1
Depends: libc6 (>= 2.2.1-2)
Filename: ./wireless-tools_20-1.1_arm.ipk
Size: 17032
MD5Sum: 695142d573351ca6e8ddffcfc77fa195
Description: Tools for manipulating Linux Wireless Extensions
 This package contains the Wireless tools, used to manipulate
 the Linux Wireless Extensions. The Wireless Extension is an interface
 allowing you to set Wireless LAN specific parameters and get the
 specific stats.
 .
 The tools in this package only work with kernel versions 2.2.14
 and above, and 2.3.24 and above.

Package: xaccel
Priority: optional
Version: 0.2
Architecture: arm
Maintainer: Jim Gettys
Depends: libc6, xlibs, xserver-tiny-h3600
Section: x11
Filename: ./xaccel_0.2_arm.ipk
Size: 3709
MD5Sum: 0d30362d0e2100b7d6ddb39f9f26dc30
Description: Control the screen orientation by using the BackPAQ accelerometer.
 This program is meant to run in the background and control the
 orientation of the screen using the BackPAQ accelerometer. It does
 slight amounts of smoothing to reduce the likelyhood of transients.
 If it can't open the accelerometer it will sleep for 10 seconds
 before it tries again.
 .

 



Package: xbase-clients
Priority: optional
Section: x11
Installed-Size: 3916
Debian-Maintainer: Branden Robinson <branden@debian.org>
Maintainer: Carl Worth <cworth@handhelds.org>
Architecture: arm
Source: xfree86
Version: 4.1-1
Replaces: xbase (<< 3.3.2.3a-2), xf86setup (<< 3.3.2.3a-9), xserver-common (<< 4.0), xmodmap, xcontrib, xpm4g-dev, xpm-bin, xsm
Provides: xmodmap, xcontrib, xpm-bin, xsm
Depends: debconf (>= 0.3.83), cpp, libc6 (>= 2.2.1-2), libfreetype6, libgl1, libncurses5 (>= 5.2.20010310-1), libxaw7 (>= 4.0.1-1), xlibs (>= 4.0.1-11)
Conflicts: xbase (<< 3.3.2.3a-2), xserver-common (<< 3.3.2.3a-9), xmodmap, xaw-wrappers (<< 0.90), xfonts-100dpi (<< 3.3.3.1-3), xfonts-75dpi (<< 3.3.3.1-3), xfonts-base (<< 3.3.3.1-3), xfonts-cyrillic (<< 3.3.3.1-3), xfonts-scalable (<< 3.3.3.1-3), xfnt100 (<= 3.3.2.3a-1), xfnt75 (<= 3.3.2.3a-1), xfntbase (<= 3.3.2.3a-1), xfntcyr (<= 3.3.2.3a-1), xfntscl (<= 3.3.2.3a-1), xdm (<< 4.0), xsm, xcontrib, xpm4g-dev, xpm-bin
Filename: ./xbase-clients_4.1-1_arm.ipk
Size: 198374
MD5Sum: 29c7c67377095630c3f0b7ac99b0640f
Description: miscellaneous X clients
 An X client is a program that interfaces with an X server (almost always
 via the X libraries), and thus with some input and output hardware like a
 graphics card, monitor, keyboard, and pointing device (such as a mouse).
 .
 This package provides a miscellaneous assortment of several dozen X
 clients that ship with the X Window System, including:
  - startx and xinit, which initialize X sessions from the command line;
  - xauth, a tool for controlling access to the X session;
  - xedit, a text editor;
  - xbiff, a tool which tells you when you have new email;
  - xcalc, a scientific calculator desktop accessory;
  - xclipboard, a tool to manage cut-and-pasted text selections;
  - xcutsel, which exchanges selection and cut buffer contents;
  - xconsole, which monitors system console messages;
  - xditview, a viewer for ditroff output;
  - xeyes, a demo program in which a pair of eyes track the pointer;
  - xfd, a tool that displays all the glyphs in a given X font;
  - xfontsel, a tool for browsing and selecting X fonts;
  - xhost, a very dangerous program that you should never use;
  - xkill, a tool for terminating misbehaving X clients;
  - xload, a monitor for the system load average;
  - xlogo, a demo program that displays the X logo;
  - xmag, which magnifies parts of the X screen;
  - xman, a manual page browser;
  - xmessage, a tool to display message or dialog boxes;
  - xrefresh, a tool that forces a redraw of the X screen;
  - xsetroot, a tool for tailoring the appearance of the root window;
  - xvidtune, a tool for customizing X server modelines for your monitor;
  - xwd, a utility for taking window dumps ("screenshots") of the X session;
  - xwud, a viewer for window dumps created by xwd;
  - oclock and xclock, graphical clocks;
  - beforelight, a screen saver;
  - bitmap, a monochrome bitmap file editor;
  - bmtoa, a tool that converts a monochrome bitmap to ASCII text;
  - cxpm and sxpm, tools for checking and viewing X pixmap files;
  - iceauth, a tool for manipulating ICE protocol authorization records;
  - xset, a tool for setting miscellaneous X server parameters;
  - xmodmap, a utility for modifying keymaps and pointer button mappings in X;
  - xsetmode and xsetpointer, tools for handling X Input devices;
  - setxkbmap, xkbbell, xkbcomp, xkbevd, xkbprint, xkbvleds, and xkbwatch,
    tools for managing the X keyboard extension (XKB);
  - xsm, a session manager for X sessions;
  - smproxy, a session manager proxy for X clients that do not use the X
    session manager protocol;
  - xgamma, a tool for querying and setting a monitor's gamma correction;
  - appres, editres, listres, viewres, and xrdb, which query and update the
    X resource database;
  - Xmark, x11perf, x11perfcomp, and xieperf, tools for benchmarking
    graphical operations under the X Window System;
  - fstobdf, which retrieves a font in BDF format from an X font server;
  - xcmsdb, a device color characteristic utility for the X Color Management
    System;
  - xstdcmap, a utility to selectively define standard colormap properties;
  - xev, an X event displayer;
  - xfindproxy, a tool to locate X proxy services;
  - xlsatoms, which lists interned atoms defined on an X server;
  - xlsclients, which lists client applications running on an X display;
  - xlsfonts, a server font list displayer;
  - xprop, a property displayer for X;
  - xdpyinfo, a display information utility for X;
  - xwininfo, a window information utility for X;
  - glxinfo, a GLX extension information utility for X;
  - xvinfo, an Xv extension information utility for X;
  - ico, an X graphics demo using an animated polyhedron;
  - dga, a demo program for the DGA extension; and
  - xgc, an (unfinished) X graphics demo program.

Package: xcalibrate
Priority: optional
Version: 0.0
Architecture: arm
Maintainer: Carl Worth <cworth@handhelds.org>
Depends: libc6, xlibs
Filename: ./xcalibrate_0.0_arm.ipk
Size: 6641
MD5Sum: 1ff1b7f86d9ee3c4f9d261d6c69059be
Description: calibrate the iPAQ H3600 touch screen for X

Package: xfonts-75dpi
Priority: optional
Section: x11
Installed-Size: 2912
Debian-Maintainer: Branden Robinson <branden@debian.org>
Maintainer: Carl Worth <cworth@handhelds.org>
Architecture: all
Source: xfree86
Version: 4.0.2-13
Replaces: xfnt75
Provides: xfnt75
Depends: xutils
Suggests: xfs | xserver
Conflicts: xfnt75, xbase-clients (<< 4.0)
Filename: ./xfonts-75dpi_4.0.2-13_all.ipk
Size: 173134
MD5Sum: b99622fecd62b08624fd4c0977b61cfd
Description: 75 dpi fonts for X
 xfonts-75dpi provides a set of bitmapped fonts at 75 dots per inch.  In most
 cases it is desirable to have the X font server (xfs) and/or an X server
 installed to make the fonts available to X clients.
 .
 This package and xfonts-100dpi provide the same set of fonts, rendered at
 different resolutions; only one or the other is necessary, but both may be
 installed.  xfonts-75dpi may be more suitable for small monitors and/or small
 screen resolutions (under 1024x768).
 .
 This package requires the xutils package to prepare the font directories
 for use by an X server or X font server.

Package: xfonts-base
Priority: optional
Section: x11
Installed-Size: 7724
Debian-Maintainer: Branden Robinson <branden@debian.org>
Maintainer: Carl Worth <cworth@handhelds.org>
Architecture: all
Source: xfree86
Version: 4.0.2-13
Replaces: xfntbase, xfonts-cjk
Provides: xfntbase, xfonts-cjk
Depends: xutils
Suggests: xfs, xserver
Conflicts: xfntbase, xfonts-cjk, xbase-clients (<< 4.0)
Filename: ./xfonts-base_4.0.2-13_all.ipk
Size: 24879
MD5Sum: 26837af24947d47947962450480e9258
Description: standard fonts for X
 xfonts-base provides a standard set of low-resolution bitmapped fonts.  In
 most cases it is desirable to have the X font server (xfs) and/or an X server
 installed to make the fonts available to X clients.
 .
 If you are not using a remote font server, you must install this package if
 you are installing an X server.  It contains fonts without which X servers
 will not work.
 .
 This package also provides a set of files that can be used by the X or
 fonts server to transcode fonts from one encoding to another (e.g., KOI8-R
 to ISO-8859-5).
 .
 This package requires the xutils package to prepare the font directories
 for use by an X server or X font server.

Package: xfonts-ttf
Priority: optional
Version: 0.0
Architecture: all
Maintainer: Carl Worth <cworth@handhelds.org>
Depends: xutils
Filename: ./xfonts-ttf_0.0_all.ipk
Size: 15567
MD5Sum: ec6912955eda9edf873f892677fae523
Description: free TrueType fonts to be used within X

Package: xlibs
Priority: optional
Section: libs
Installed-Size: 4306
Debian-Maintainer: Branden Robinson <branden@debian.org>
Maintainer: Carl Worth <cworth@handhelds.org>
Architecture: arm
Source: xfree86
Version: 4.1-1
Replaces: xlib, xbase (<< 3.3.2.3a-2), xlib6 (<< 3.3.2.3-2), xbase-clients (<< 4.0), xlib6g (<< 4.0), xlib6g-dev (<< 4.0), xpm4g, fvwm-common, xcontrib
Provides: libxpm4
Depends: xfree86-common (>> 4.0), libc6 (>= 2.2.1-2), xlibs (>= 4.0.1-11)
Conflicts: xlib, xlib6 (<< 3.3.2.3-2), xlib6g (<< 4.0), xlib6g-dev (<< 4.0), xbase-clients (<< 4.0), xpm4g
Filename: ./xlibs_4.1-1_arm.ipk
Size: 775145
MD5Sum: 3ef40a72f771ea831267577f4cbdb4af
Description: X Window System client libraries
 NOTE: I really want to break this package up into lots of little
 packages for familiar, (mainly so we can dump things like Xt if no
 binaries depend on them). - Carl Worth <cworth@handhelds.org>
 .
 The X libraries are an interface between X client programs and the
 hardware-oriented X servers, and consist of routines to read input from the
 keyboard and pointer, draw on the screen, etc., in an abstract manner that is
 independent of the particular characteristics of the hardware.  The X
 libraries, and the programs that use them, communicate with X servers by
 means of the X protocol.
 .
 libX11 (a.k.a. Xlib) provides the low-level functionality, dealing mostly
 with the wire protocol and in terms of basic operations such as opening and
 closing the X protocol connection, creating graphics contexts, drawing
 graphics primitives such as lines, arcs, and glyphs, handling events, and so
 forth.
 .
 libXpm, the X pixmap library, is a set of routines used to store and retrieve
 X pixmaps (a data structure comprising a rectangular array of pixels) from
 files; the xpm file format is an extension of the monochrome bitmap file
 format in the X11 specification.  (Traditionally, libXpm was maintained and
 distributed separately from the X Window System, but XFree86 has absorbed
 this library).
 .
 libXt, the X Toolkit Instrinsics, is an abstract widget library upon which
 graphical widget libraries (such as Athena and LessTif) may be developed; the
 Intrinsics provide a number of useful interfaces to X conventions and
 protocols, in many cases reducing a long series of Xlib calls to just a
 couple of Xt calls.
 .
 libXmu is a set of miscellaneous utility functions useful to client
 programmers.
 .
 The remainder of the libraries in this package implement the client side
 of various X protocol extensions:
  - libICE, the Inter-Client Exchange extension;
  - libSM, the Session Management extension;
  - libXext, a collection of several commonly-used extensions;
  - libXi, the X Input extension;
  - libXp, the X Printing extension; 
  - libXrandr, the Rotate and Resize extension; and
  - libXtst, the X Testing extension.
 .
 xlibs also contains the XKB keyboard parameter files, locale data, and a set
 of bitmap and pixmap image files commonly used by X clients.

Package: xserver-tiny-h3600
Priority: optional
Version: 4.1-3
Architecture: arm
Maintainer: Alexander Guy <a7r@handhelds.org>
Depends: libc6, zlib1g, h3600-utils
Filename: ./xserver-tiny-h3600_4.1-3_arm.ipk
Size: 343799
MD5Sum: dfe79e7065acca49894f2547233cdc6f
Description: X server for the iPAQ H3600 touchscreen, display, and optional HP VGA PC Card.

Package: xvkbd
Priority: optional
Version: 0.0
Architecture: arm
Maintainer: Carl Worth <cworth@handhelds.org>
Depends: libc6, xlibs, libxaw6
Filename: ./xvkbd_0.0_arm.ipk
Size: 13591
MD5Sum: 45cd39eebf02283965268bbba5436528
Description: On-screen virtual keyboard for X

Package: zlib1g
Priority: standard
Section: libs
Installed-Size: 144
Debian-Maintainer: Mark Brown <broonie@debian.org>
Maintainer: Carl Worth <cworth@handhelds.org>
Architecture: arm
Source: zlib
Version: 1:1.1.3-14
Provides: libz1
Depends: libc6 (>= 2.2.1-2)
Conflicts: zlib1 (<= 1:1.0.4-7)
Filename: ./zlib1g_1.1.3-14_arm.ipk
Size: 28970
MD5Sum: c7f98957d73220efb3e39ec75ac09c23
Description: compression library - runtime
 zlib is a library implementing the deflate compression method found
 in gzip and pkzip.  This package includes the shared library.

