Card Export II PPC 2.20 Readme File
----------------------------

(c) Copyright by Dmytro Pohromskyy 2005, 2006. All Rights reserved.
* Card Export, Softick are trademarks of Dmytro Pohromskyy.

All other brand names, product names or trademarks are the property of 
their respective owners. 

1.What is Card Export II.

Card Export II is an application to copy the data on your computer to the
external storage card (SD/MMC, CF, or similar) on your Pocket PC
without using Active Sync application

Card Export II implements industry standart USB Mass Storage protocol and
uses built-in operation system drivers to provide access to the cards.

1.1 How to use Card Export II.

Card Export will update your system upon first launch and ask you to reset
system. After soft reset you can switch between Card Export (Mass Storage) and 
Active Sync modes via Tray menu icon. In Active Sync mode you can synchronize your
handheld and browse main memory from Windows Explorer. In Card Export mode your
storage cards can be accessed as logical drives from any desktop software on many 
platforms incuding Microsoft Windows Explorer, Mac OS Finder, Linux, etc.

Please note that you need to disconnect your PDA from USB to switch between 
ActiveSync and Card Export modes.

Using flash card as removable disk

With Card Export II you can use your handheld with flash card as
removable disk (like a large capacity floppy) from Windows or Mac OS X desktop 
on your computer. 

2. System requirements

Please check compatibility list at http://www.softick.com/ppc/cardexport2/

3. Installation

  Microsoft Windows installation:
    1. Run CardExportPPC-218.exe and follow onscreen instuctions.
    2. Follow instructions, displayed on PDA

  Other operation systems:

  If you have a handheld with Windows Mobile 2003 follow these steps:

    1. Install cardexport.ARMV4.CAB to the device. 
    2. Run cardexport.ARMV4.CAB from the device.
    3. Follow instructions, displayed on PDA

  If you have a handheld with Windows Mobile 2005 follow these steps:
    1. Install cardexport-wm5.ARMV4.CAB to the device. 
    2. Run cardexport-wm5.ARMV4.CAB from the device.
    3. Follow instructions, displayed on your device

  
  Note: Please do not attempt to install Card Export II to the storage card, install
  to the main memory instead. 

  You don't need to install anything on desktop computer for supported operation systems.
  For Windows 98 you need to install supplied drivers for USB Mass Storage support.

3.2 Uninstallation

  To remove Card Export 2 you need to:
  	1. Select "Uninstall" from program menu and perform soft reset. This disables 
  	   Card Export's USB driver.

  	2. Card Export will ask you to reset your device.

  	3. After reset remove Card Export as any other Pocket PC application via Remove 
  	   Program applet.

4.Known issues:

  Card Export is unable to export built-in storages based on IPSM (Intel Persistent Storage Manager). 
  These storages aren't FAT based and unreadable from desktop.

5. Disclaimer

This software is provided without warranty. We will not take responsibility 
for any form of damage or loss that occurs when/by using or not using this 
software including but not limited to data/information loss, loss of profit, 
hardware or media damage.

6. Contact

If you have any questions, suggestions or problems, please e-mail us at:

    support@softick.com

For more information, please visit our site. The latest version can be 
downloaded at: 

    http://www.softick.com

7. History
    05 Nov 2006			version 2.20
                        Support for  Eten M600, Eten G500, Acer n300, Mitac MIO P550  Yakumo deltaX 5 BT

    12 Sep 2006			version 2.19
    					E-Ten m500 supported for (Windows Mobile 2003 Phone Edition)

	18 Jul 2006			version 2.18	
									Supports Fujitsu Siemens Pocket Loox C550 and N560
									Support Dell Axim X51V with A12 ROM Update

    19 Mar	2006		version 2.13  [WM2005] Dell Axim X50V/X51V write support
    								  [WM2005] FSC Pocket Loox N500 write series support
    								  bug fixes
    31 Jan	2006		version 2.11: Fixed problems with installation on localized version of Windows Mobile 2005
    								  Fixed problems with reading/writing to the Compact Flash cards
    								  Fixed write problem on HTC Wizard platform (Qtek 9100, I-Mate K-Jam, etc)
    								  Dell X50V with WM5 upgrade now supported in readonly mode only.

    01 Jan	2006		version 2.10:
    					Generic support for Windows Mobile 2005 (Windows CE 5.0) devices

    04 Nov  2005		2.05 released. Samsung S3C2410 and Samsung S3C2440 CPU supported. Performance was improved

    04 Sept 2005        2.04 release. Texas Instruments OMAP platform supported

	01 June 2005 		1st public beta. Intel XScale PXA systems supported
